We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact black adapter with USB Type-E socket and 20-pin header plug

Fervit

Fervit USB 3.1 Type-E to USB 3.0 20-Pin Header Adapter with CH334P

SKU CH-S0GB-2W8F2

Converts a motherboard USB 3.1 Type-E header to a 20-pin USB 3.0 header with CH334P chipset for dual USB 2.0 support at 10Gbps

  • Converts motherboard USB-E header to USB 3.1 or 3.2 front-panel connector
  • Supports 10Gbps data from SSD or HDD over Type-E port
  • CH334P chipset splits one USB 2.0 lane into two for dual 2.0 devices
  • Direct plug-in design fits any USB 3.0 20-pin header with no extra parts
  • No audio, video, docking, PD power or DP alt mode support on Type-E port

Front Panel USB Adapter

The Fervit modular adapter bridges a motherboard USB 3.1 Type-E header to a standard USB 3.0 20-pin front panel connector. It uses a CH334P chipset to split the single USB 2.0 lane from the Type-E port into two lanes on the 19-pin or 20-pin header, allowing two USB 2.0 devices to run simultaneously. The compact unit plugs directly into the header without cables or extra brackets. Data throughput reaches 10Gbps for compatible storage devices.

Who This Suits

Builders with a newer motherboard that only provides a Type-E front panel header but a case equipped with a USB 3.0 20-pin connector will find this adapter essential. It also serves systems that need two USB 2.0 ports from a single Type-E lane. Not suitable for users who require Power Delivery, DisplayPort alt mode, or any audio, video, or docking output through the front panel, as the adapter does not support those functions.

Installation Notes

The adapter inserts straight into the motherboard Type-E socket and the case 20-pin plug seats onto the IDC socket; no screws, drivers, or external power are required. A common issue is misaligning the keyed connector, which can bend pins on the 20-pin header. Verify the motherboard manual to confirm the Type-E pinout matches the adapter before applying force. Ensure the case cable is fully seated to avoid intermittent USB 2.0 connectivity on the split lanes.

Highlights

  • Converts motherboard USB-E header to USB 3.1 or 3.2 front-panel connector
  • Supports 10Gbps data from SSD or HDD over Type-E port
  • CH334P chipset splits one USB 2.0 lane into two for dual 2.0 devices
  • Direct plug-in design fits any USB 3.0 20-pin header with no extra parts
  • No audio, video, docking, PD power or DP alt mode support on Type-E port

Specifications

BrandFervit

Questions about this item

My motherboard only has a USB 3.1 Type-E header — can I plug this adapter straight in?

Yes, the compact adapter inserts directly into the motherboard Type-E female header and needs no extra cables or brackets.

Will the CH334P chipset let me run two USB 2.0 devices at once from the single 2.0 lane on the Type-E port?

The CH334P splits the single USB 2.0 lane into two lanes on the 19/20-pin header so two USB 2.0 devices can operate simultaneously.

How do I confirm the adapter is delivering 10 Gbps data after I connect an SSD?

Check the OS device manager or a benchmark tool — the link should negotiate at 10 Gbps when a compatible SSD or HDD is attached.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.