We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short internal cable with single SFF8654 8i connector branching to two SFF8087 4X plugs

Fervit

Fervit Slim SAS SFF8654 8i to Dual Mini SAS 4X SFF8087 Cable .5m 12Gbps 32AWG 10 Ohm

SKU CH-293J-AED84

Connects a single SFF8654 8i port to dual SFF8087 4X channels for 12Gbps SAS drive expansion in dense server chassis

  • Splits one SFF8654 8i port into two SFF8087 4X channels for multidrive expansion
  • Delivers stable 12Gbps bandwidth for enterprise RAID, HDD and SSD systems
  • 32AWG premium copper with 10 Ohm impedance preserves signal integrity
  • .5 metre length enables clean routing in highdensity server chassis
  • Servergrade shielding reduces signal loss and crosstalk

Fervit Slim SAS SFF8654 8i Cable

The Fervit Slim SAS SFF8654 8i cable connects a single internal port to dual independent SFF8087 4X channels. It is built for enterprise RAID, HDD and SSD systems that require multidrive expansion in dense server chassis.

Suits highdensity internal routing

This 0.5 metre cable suits builders who need clean, compact internal routing and stable 12Gbps bandwidth for SAS drives. It is not for installations that require longer reach between backplanes or external enclosure connections.

Sustained 12Gbps signal integrity

Under sustained load the 32AWG premium copper wire and precise 10Ohm impedance maintain excellent signal integrity. Servergrade antiinterference shielding minimises signal loss and crosstalk during continuous multidrive operation.

Highlights

  • Splits one SFF8654 8i port into two SFF8087 4X channels for multidrive expansion
  • Delivers stable 12Gbps bandwidth for enterprise RAID, HDD and SSD systems
  • 32AWG premium copper with 10 Ohm impedance preserves signal integrity
  • .5 metre length enables clean routing in highdensity server chassis
  • Servergrade shielding reduces signal loss and crosstalk

Specifications

BrandFervit

Questions about this item

What controller port does the SFF8654 8i end of this cable plug into?

The cable terminates in a single SFF8654 8i connector that fits a matching 8i port on your SAS controller or backplane.

Will the dual SFF8087 4X connectors work with drives that only support 6Gbps SAS?

Yes, the 12Gbps-rated cable is backward compatible and will carry 6Gbps traffic to those drives without issue.

How can I verify the link is running at 12Gbps after installation?

Check the controller BIOS or management utility; it should report each SFF8087 channel at 12Gbps with no errors.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.