We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short Fervit SFF-8654 8i breakout cable with eight 90degree SATA connectors, .5M length

Fervit

Fervit SFF-8654 8i to 8 Port 90Degree SATA Cable .5M 24Gbps

SKU CH-067B-DJXN2

90-degree SATA breakout cable splits one SFF-8654 8i port into eight drives at 24 Gbps over .5 m

  • 90° angled SATA connectors save space and reduce cable strain in compact chassis
  • Full-cover anti-misplug design prevents reverse insertion and protects server hardware
  • Single SFF-8654 8i port breaks out to 8 independent SATA ports for multi-drive expansion
  • 24Gbps bandwidth supports NVMe SSDs, HDDs and enterprise RAID systems
  • 5M / 19.68in length enables clean short-range routing in high-density environments

SFF-8654 8i to 8 Port 90Degree SATA Cable

This 0.5 metre breakout cable converts a single SFF-8654 8i connector into eight independent SATA ports. The 90degree angled SATA connectors save internal space and reduce cable strain in compact server chassis. A fullcover antimisplug design prevents reverse insertion and protects hardware from damage. It supports 24Gbps bandwidth for NVMe SSDs, HDDs and enterprise RAID systems.

Suits highdensity servers needing multidrive

Ideal for administrators routing eight drives from one slimline SAS port in tight enclosures where straight connectors would block airflow or adjacent slots. The short 19.68in length keeps cable runs clean inside 1U or 2U chassis. Not suitable for builds requiring longer reach between backplane and controller, or for systems lacking an SFF-8654 8i host interface. Buyers needing external eSATA connectivity should look elsewhere.

24Gbps bandwidth over eight SATA ports

The cable delivers 24Gbps ultrahighspeed bandwidth across all eight SATA connections simultaneously. This specification determines whether the link can saturate modern NVMe SSDs and enterprise RAID arrays without bottleneck. Verify that your controller and drives support this throughput to match the cable's rated performance.

Highlights

  • 90° angled SATA connectors save space and reduce cable strain in compact chassis
  • Full-cover anti-misplug design prevents reverse insertion and protects server hardware
  • Single SFF-8654 8i port breaks out to 8 independent SATA ports for multi-drive expansion
  • 24Gbps bandwidth supports NVMe SSDs, HDDs and enterprise RAID systems
  • 5M / 19.68in length enables clean short-range routing in high-density environments

Specifications

BrandFervit

Questions about this item

Will the SFF-8654 8i connector or the eight SATA ends wear out and need replacement?

The SFF-8654 8i and SATA connectors are rated for standard server mating cycles; no scheduled replacement is required unless physical damage occurs.

What limits sustained throughput first — the SFF-8654 8i link or the eight SATA ports?

The cable supports 24Gbps across the SFF-8654 8i interface; each SATA port runs at its native 6Gbps, so the aggregate drive load is the practical ceiling.

Does the .5M length or the 90Degree SATA plugs affect heat or airflow in a fully populated chassis?

The 19.68in short run and 90Degree angled SATA connectors reduce cable bulk, improving airflow and adding no measurable heat of their own.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.