We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black flexible ribbon cable with right-angled PCIe 1x connector and supplementary power lead

Fervit

Fervit PCI-E 1X Riser Card 10cm 90 Degree Angled

SKU CH-RAND-SFGZH

Flexible 10 cm PCIe 1x riser with 90-degree angled socket and auxiliary power cable for tight enclosures

  • Fits tight spaces with 90-degree angled connector
  • Extends PCIe 1x slot 10 cm from motherboard
  • Flexible ribbon allows custom routing in compact builds
  • Extra power cable delivers stable power to relocated card
  • Driver-free installation works immediately on any system

PCIe 1x riser for tight builds

The Fervit PCIe 1x riser card moves an expansion card away from the motherboard using a 10cm flexible ribbon. A 90-degree angled connector fits into slots where surrounding components block straight access. No driver is required and the board includes a supplementary power cable for stable delivery.

Thermals noise and power

The passive ribbon adds no fan noise or active cooling requirement. Power draw stays within the PCIe 1x slot specification and the extra power lead simply ensures the relocated card receives adequate current. Heat dissipation depends entirely on the installed card and chassis airflow.

Replaces rigid extenders in slim cases

This riser replaces stiff right-angle brackets that cannot bend around drive cages or chassis walls. The jump is worth it when a low-profile rack or custom enclosure forces the add-in card to sit parallel to the motherboard. Builders who need a second slot or longer reach should look elsewhere.

Highlights

  • Fits tight spaces with 90-degree angled connector
  • Extends PCIe 1x slot 10 cm from motherboard
  • Flexible ribbon allows custom routing in compact builds
  • Extra power cable delivers stable power to relocated card
  • Driver-free installation works immediately on any system

Specifications

BrandFervit

Questions about this item

How do I install the 10 cm 90 degree angled riser without shorting the card?

Plug the riser into the motherboard PCIe 1x slot, route the flexible ribbon so the card faces away from the board, then secure the card in an EMI-safe location to prevent shorts from poor placement.

What upkeep does the flexible ribbon and extra power cable need over time?

Inspect the ribbon for creases or cracked traces and check the auxiliary power connector for loose pins; reseat both if contact becomes intermittent.

At what point does the 10 cm length limit signal integrity under sustained load?

The 10 cm ribbon is designed for PCIe 1x signalling; sustained high-throughput use stays within spec as long as the cable is not sharply bent or coiled.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.