We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular circuit board with gold edge connector and M-key slot extending from 2230 to 2280 length

Fervit

Fervit NVME M-Key 2230 to 2280 Extension Adapter for ROG Ally

SKU CH-0QSP-Y6236

Allows a 2280 NVME SSD to replace the 2230 module in a ROG Ally using a PCI-Express 4.0 x4 extension adapter

  • Fits a full-size 2280 NVME SSD inside the ROG Ally
  • PCIe 4.0 x4 link keeps the drive at native speed
  • Swap takes roughly 20 minutes with basic tools
  • Supports up to 8TB capacity for a larger game library
  • M-Key 2230 to 2280 extension only — no SATA conversion

ROG Ally 2230-to-2280 NVME Extension

This adapter lets ROG Ally owners replace the factory 2230 NVME module with a full-length 2280 NVME drive. It bridges the shorter slot to the longer form factor over a PCI-Express 4.0 x4 link. The part is built for handheld gamers who need more capacity than the original drive provides. It does not convert NVME to SATA or SATA to NVME.

Thermals noise and power in normal use

The passive PCB adds no fan noise and draws no extra power beyond the SSD itself. Heat from the larger drive dissipates through the Ally’s existing thermal solution. Installation takes roughly 20 minutes and requires only a clone of the original system onto the new 2280 drive before swapping. No active cooling or additional cables are introduced.

Build fit and what it frees up

The adapter fits inside the ROG Ally chassis without modifying the shell, letting a standard 2280 NVME SSD sit where only a 2230 module lived before. It unlocks up to 8 TB of storage for game libraries and media. Builders who need SATA connectivity or a second NVME slot will not find that here; the device is a single-slot extension only.

Highlights

  • Fits a full-size 2280 NVME SSD inside the ROG Ally
  • PCIe 4.0 x4 link keeps the drive at native speed
  • Swap takes roughly 20 minutes with basic tools
  • Supports up to 8TB capacity for a larger game library
  • M-Key 2230 to 2280 extension only — no SATA conversion

Specifications

BrandFervit

Questions about this item

How do I install the Fervit 2230-to-2280 NVME adapter in the ROG Ally, and what step is often missed?

Insert the 2280 SSD into the adapter, clone the original 2230 drive, then swap the original module for the assembled adapter; skipping the clone step leaves the new drive unbootable.

What maintenance or replacement will the Fervit NVME extension adapter need over time?

The adapter is a passive PCB with no moving parts or firmware, so it requires no scheduled maintenance; only the 2280 SSD itself may eventually need replacement.

What limit appears first during sustained use of the PCI-Express 4.0 x4 link on this adapter?

The ROG Ally’s thermal envelope throttles the 2280 SSD before the adapter’s PCIe 4.0 x4 bandwidth is saturated.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.