We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Fervit Mini SAS SFF8087 to four 29pin SFF8482 SATA power cable 1M 3.3FT

Fervit

Fervit Mini SAS SFF8087 to 4x 29Pin SFF8482 SATA Power Cable 1M 3.3FT

SKU CH-GZG1-K116D

Splits one Mini SAS SFF8087 port into four 29-pin SFF8482 SAS/SATA drive connectors with integrated SATA power, using high-quality copper for reliable data transfer in servers

  • Converts one SFF8087 Mini SAS port to four 29pin SFF8482 drive ports
  • Integrated SATA power supply delivers stable power to connected hard drives
  • High-quality copper wire construction supports high-speed SAS data transfer
  • Flexible internal design enables clean routing inside rackmount servers and NAS enclosures
  • 1M / 3.3FT length offers sufficient range for medium-distance multi-drive connections

Server storage fanout cable

This Fervit cable converts a single SFF8087 Mini SAS port into four 29pin SFF8482 SAS/SATA drive connections with integrated SATA power. It is designed for administrators building or expanding enterprise storage arrays and RAID systems inside rackmount servers or NAS enclosures. The one‑metre length suits medium‑distance multi‑drive layouts.

Thermals noise and power

Passive copper wiring produces no audible noise and adds negligible heat to the chassis airflow. The integrated SATA power tails draw supply directly from the system to drive the attached disks, removing the need for separate power cables and reducing internal clutter. High‑quality conductors maintain signal integrity for high‑speed SAS transfers.

Replaces individual drive cables

This assembly replaces four discrete data and power runs, saving routing time and backplane space during initial build or drive upgrades. The jump is worthwhile when consolidating cabling in a 1M reach scenario or when adding multiple drives to a single HBA port. It does not suit builders who need longer runs or external eSATA connectivity.

Highlights

  • Converts one SFF8087 Mini SAS port to four 29pin SFF8482 drive ports
  • Integrated SATA power supply delivers stable power to connected hard drives
  • High-quality copper wire construction supports high-speed SAS data transfer
  • Flexible internal design enables clean routing inside rackmount servers and NAS enclosures
  • 1M / 3.3FT length offers sufficient range for medium-distance multi-drive connections

Specifications

BrandFervit

Questions about this item

How do I connect the Mini SAS SFF8087 end and the four 29pin SFF8482 connectors to my drives?

Insert the SFF8087 plug into the controller port until it clicks, then attach each SFF8482 connector to a drive; the integrated SATA power leads must also be plugged into each drive for operation.

Will the SATA power leads or the copper data conductors need replacement over time?

The copper data conductors are rated for continuous SAS traffic and do not wear out; the SATA power leads are passive wires and only need attention if a connector becomes loose or damaged.

At what point does the 1M length limit signal quality in a RAID array?

The 1M / 3.3FT length stays within the Mini SAS electrical budget, so signal degradation appears only when total trace length including backplane exceeds the controller specification.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.