We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black breakout cable with SFF8087 plug splitting to four SFF8482 connectors and inline power module, 50CM length

Fervit

Fervit Mini SAS SFF8087 to 4Port SFF8482 Breakout Cable with Power Supply 50CM

SKU CH-4VF9-GD8JE

A 50 cm breakout cable splits one SFF 8087 Mini SAS port into four SFF 8482 connectors with integrated power for SAS drives

  • Connect four SAS drives from one SFF8087 port using 1to4 breakout design
  • Builtin power supply provides stable power for highspeed data transmission to SAS hard drives
  • 50CM compact length keeps internal wiring tidy in compact server chassis
  • Servergrade antiinterference shielding reduces signal loss crosstalk and noise
  • Suited for enterprise RAID arrays storage controllers and data center hardware upgrades

Mini SAS Breakout Cable

This Fervit cable splits a single SFF8087 port into four SFF8482 connectors, allowing a RAID controller or storage HBA to serve multiple SAS hard drives. An integrated power supply feeds each drive directly, removing the need for separate power cables inside a dense server chassis. It is built for administrators expanding enterprise storage arrays.

50 cm Internal Wiring Limit

The 50 cm length restricts use to short internal runs within the same enclosure; it cannot reach between adjacent racks or full-height towers. Shielding reduces crosstalk and noise on each lane, but the physical SAS electrical specification still governs maximum link distance and speed. Builders must plan drive placement around this fixed reach.

Four-Drive Expansion Headroom

Each cable supports up to four drives simultaneously, matching typical backplane rows in 1U or 2U servers. Adding a fifth drive requires a second breakout cable and an additional controller port. The onboard power circuit handles the spin-up current of the connected drives, but total subsystem draw remains limited by the host connector rating.

Highlights

  • Connect four SAS drives from one SFF8087 port using 1to4 breakout design
  • Builtin power supply provides stable power for highspeed data transmission to SAS hard drives
  • 50CM compact length keeps internal wiring tidy in compact server chassis
  • Servergrade antiinterference shielding reduces signal loss crosstalk and noise
  • Suited for enterprise RAID arrays storage controllers and data center hardware upgrades

Specifications

BrandFervit

Questions about this item

Should I choose this 50CM cable or a longer version for my server chassis?

The 50CM length is designed for tidy, short-distance wiring inside compact server chassis. If your drives sit further from the controller, measure the run and consider a longer cable.

What does the SFF8087 to four SFF8482 breakout actually do in a real machine?

It splits one Mini SAS SFF8087 controller port into four SFF8482 connectors, letting you attach up to four SAS hard drives with integrated power for stable operation.

Which SAS standard does the SFF8087 interface cap at in practice?

The SFF8087 connector carries SAS signals; the supported speed depends on your controller and drives, not the cable itself.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.