We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A short blue cable with Mini SAS HD and U.2 connectors

Fervit

Fervit Mini SAS HD to U.2 Cable SFF8643 to SFF8639 12Gbps 0.5m

SKU CH-QARE-VM8J4

Connects Mini SAS HD SFF8643 to U.2 SFF8639 for NVMe SSD deployment at 12Gbps with .5m shielded cable for compact server chassis

  • Direct SFF8643 to SFF8639 link enables NVMe U.2 SSD deployment
  • 12Gbps bandwidth supports enterprise-grade storage performance
  • 5m length allows clean internal wiring in compact chassis
  • Server-grade shielding reduces signal loss and electromagnetic interference
  • Compatible with RAID controllers and storage arrays for U.2 expansion

Direct SFF8643 to SFF8639 cable

The Fervit Mini SAS HD to U.2 cable provides a direct link between an SFF8643 controller port and an SFF8639 U.2 NVMe SSD. It is built for server and storage-array installations that require a short internal connection. The 0.5m length keeps routing tidy inside compact chassis. Server-grade shielding protects signal integrity at high speed.

Suits internal U.2 SSD deployments

This cable suits administrators adding U.2 NVMe drives to RAID controllers or backplanes with Mini SAS HD ports. The half-metre reach is ideal for dense 1U or 2U servers where longer cables would block airflow. Builders who need external drive connections, longer runs between racks, or a different controller pinout should look at other cable types.

12Gbps transmission rate

The single specification that decides fit is the 12Gbps bandwidth rating. Your controller and SSD must both support this signalling speed to realise the stated performance. Verify that the host port uses the SFF8643 interface and the drive uses the SFF8639 U.2 connector before ordering.

Highlights

  • Direct SFF8643 to SFF8639 link enables NVMe U.2 SSD deployment
  • 12Gbps bandwidth supports enterprise-grade storage performance
  • 5m length allows clean internal wiring in compact chassis
  • Server-grade shielding reduces signal loss and electromagnetic interference
  • Compatible with RAID controllers and storage arrays for U.2 expansion

Specifications

BrandFervit

Questions about this item

How do I connect the SFF8643 end to my RAID controller without damaging the latch?

Align the SFF8643 connector with the Mini SAS HD port on the controller, push straight in until the metal latch clicks, then pull gently to confirm it is seated; forcing it at an angle bends the latch tabs.

Will the shielding degrade and need replacement after heavy use?

The servergrade shielding is built into the cable assembly and does not wear out; only physical damage such as crushed insulation or bent connector pins would require a new cable.

At what point does the 12Gbps link become the bottleneck during sustained writes?

The cable itself is rated for 12Gbps, so the first limit under sustained load will be the controller or U.2 SSD maximum throughput, not the 0.5m link.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.