We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Mini SAS HD SFF8643 to four SFF8482 fanout cable with integrated power lead, 39.37 inch length

Fervit

Fervit Mini SAS HD SFF8643 to 4×SAS SFF8482 Cable 39.37 inch 12Gbps 30AWG with Power Cable

SKU CH-MRFN-YXQR2

Converts a single SFF8643 Mini SAS HD port into four SFF8482 SAS/SATA drive ports at 12Gbps with integrated power cable and 30AWG construction over 39.37 inch length

  • Converts one SFF8643 port into four SFF8482 drive ports for multidrive expansion
  • 12Gbps SAS 3.0 highspeed transmission supports enterprise HDDs SSDs and RAID systems
  • Integrated power cable supplies stable power to storage devices streamlining internal server wiring
  • 30AWG pure copper wire minimises signal loss and crosstalk for reliable performance
  • 37inch length enables flexible routing inside large rackmount servers backplanes and NAS enclosures

1-to-4 Mini SAS HD Fanout Cable

This new Fervit cable converts a single SFF-8643 Mini SAS HD host port into four SFF-8482 SAS or SATA drive ports. It supports 12Gbps SAS 3.0 transmission for enterprise HDDs, SSDs and RAID storage systems. The 39.37 inch length allows flexible routing inside rackmount servers and NAS enclosures.

Server Builders Expanding Internal Drive Counts

The 1-to-4 fanout design suits administrators adding multiple drives to a single controller port in backplanes or large chassis. An integrated power cable supplies stable power to the connected storage devices, simplifying internal wiring. Builders who require a straight-through single-port cable or external connectivity should look at something else.

12Gbps SAS 3.0 Signaling Speed

The cable is constructed with 30AWG pure copper wire to minimise signal loss and crosstalk at the rated 12Gbps speed. This specification determines whether the assembly matches the controller and drive performance requirements. Verify that the host side uses an SFF-8643 interface and the drives use SFF-8482 connectors before ordering.

Highlights

  • Converts one SFF8643 port into four SFF8482 drive ports for multidrive expansion
  • 12Gbps SAS 3.0 highspeed transmission supports enterprise HDDs SSDs and RAID systems
  • Integrated power cable supplies stable power to storage devices streamlining internal server wiring
  • 30AWG pure copper wire minimises signal loss and crosstalk for reliable performance
  • 37inch length enables flexible routing inside large rackmount servers backplanes and NAS enclosures

Specifications

BrandFervit

Questions about this item

How much heat or noise does the 12Gbps 30AWG cable add when running all day in a server?

The passive 30AWG pure copper wire generates no noise and negligible heat; all thermal output comes from the attached drives and controller, not the cable itself.

What host connector and drive interfaces must my system already have for this SFF8643 to 4×SFF8482 cable to work?

You need a single Mini SAS HD SFF8643 port on the controller or backplane and up to four SAS or SATA drives with SFF8482 connectors.

Will the 39.37inch fanout cable work reliably alongside older 6Gbps SAS 2.0 drives I want to keep?

Yes, the 12Gbps SAS 3.0 link down-negotiates to 6Gbps, so legacy drives operate at their rated speed without extra configuration.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.