We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A flat 74-pin MCIO x8 connector splits into eight SATA 7-pin plugs on a 75CM cable

Fervit

Fervit MCIO x8 to 8×SATA Cable SFFTA1016 74Pin 75CM

SKU CH-0417-3A0H3

Converts one MCIO x8 74pin host port to eight SATA 7pin drives for dense server storage expansion

  • Converts one MCIO x8 host port to eight SATA drives
  • 75 cm length allows flexible routing inside large rackmount servers
  • 74-pin SFFTA1016 connector ensures secure high-density fanout connection
  • Optimised harness reduces signal loss and crosstalk for stable data transfer
  • Server-grade build supports continuous operation in data-centre environments

MCIO x8 to Eight SATA Fanout Cable

This high-density cable converts a single MCIO x8 (SFFTA1016 74pin) host or RAID port into eight independent SATA 7pin target connectors. It enables multi-drive expansion for enterprise servers, RAID controllers, and high-capacity storage backplanes. The 75CM length supports flexible internal routing inside large rackmount enclosures. Server-grade construction ensures reliable long-term operation in data centres.

Suits RAID expansion in servers.

Builders expanding storage arrays on RAID controllers or server backplanes will use all eight SATA links from one MCIO port. The design targets enterprise environments needing dense, high-speed connectivity. Home users adding only one or two drives should choose a simpler point-to-point cable. The MCIO host interface is not found on consumer motherboards.

74-pin MCIO x8 host connector decides compatibility

The cable requires a host side with an SFFTA1016 74pin MCIO x8 port, typically on a RAID HBA or server backplane. Without that exact connector the cable cannot be used. The eight SATA 7pin targets accept standard drives or backplanes. No other interface or pin count will fit this harness.

Highlights

  • Converts one MCIO x8 host port to eight SATA drives
  • 75 cm length allows flexible routing inside large rackmount servers
  • 74-pin SFFTA1016 connector ensures secure high-density fanout connection
  • Optimised harness reduces signal loss and crosstalk for stable data transfer
  • Server-grade build supports continuous operation in data-centre environments

Specifications

BrandFervit

Questions about this item

What does the MCIO x8 to 8×SATA fanout actually deliver to each drive?

The cable splits one MCIO x8 (SFFTA1016 74pin) host or RAID port into eight separate SATA 7pin connections, giving each attached drive its own dedicated 6 Gbps SATA link.

Which interface standard does the MCIO x8 connector follow and what throughput does it cap at?

The 74pin MCIO x8 connector follows the SFFTA1016 specification and aggregates up to eight SATA 6 Gbps lanes, so the combined host port can sustain the full bandwidth of all eight drives simultaneously.

What clearance and mounting space does the 75CM cable need inside a server chassis?

At 75CM the harness reaches from a rear-mounted RAID controller to front drive bays in large rackmount enclosures, and the slim wire bundle fits standard cable-management channels without blocking airflow.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.