We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board adapter with gold edge connector and M.2 slot, plus small screw and screwdriver

Fervit

Fervit M.2 NVME SSD Adapter Card MacBook Air 2013-2017

SKU CH-JWWW-4MSTQ

Adapter card lets you install an NVMe M.2 SSD in compatible MacBook Air 2013-2017 and Mac Pro 2013 models

  • Upgrade MacBook Air 2013-2017 with NVME speed
  • Compatible with 11-inch and 13-inch models 2013-2017
  • Works with Mac Pro 2013 cylinder model
  • Includes PCB adapter, M2 screw and screwdriver
  • Enables modern NVME SSD installation in older Macs

Compatible MacBook Air models

This adapter lets owners of 11-inch and 13-inch MacBook Air models from Mid 2013 through Mid 2017 install an M.2 NVMe SSD. Supported Model IDs include MacBookAir6,1, MacBookAir6,2, MacBookAir7,1 and MacBookAir7,2. The package includes the PCB adapter, an M.2 mounting screw and a screwdriver for installation.

Mac Pro 2013 support and capacity headroom

The card also fits the Mac Pro (Late 2013) Model ID MacPro6,1, giving that workstation a path to modern NVMe storage. It accepts any standard M.2 NVMe module, so capacity is limited only by the drive you choose and the macOS version the machine can run. Older macOS releases may not recognise very large volumes without updates.

PCIe 2.0 x4 interface limits

The host systems provide a PCIe 2.0 x4 connection, capping theoretical throughput at roughly 2 GB/s regardless of the NVMe drive’s rated speed. Real-world transfer rates will be lower due to protocol overhead and the macOS storage stack. Buyers needing the full bandwidth of PCIe 3.0 or 4.0 NVMe drives should look elsewhere.

Highlights

  • Upgrade MacBook Air 2013-2017 with NVME speed
  • Compatible with 11-inch and 13-inch models 2013-2017
  • Works with Mac Pro 2013 cylinder model
  • Includes PCB adapter, M2 screw and screwdriver
  • Enables modern NVME SSD installation in older Macs

Specifications

BrandFervit

Questions about this item

Will this adapter let me keep my original 2013 MacBook Air SSD while adding an NVME drive?

The adapter replaces the factory blade SSD in MacBook Air models 6,1 and 6,2 from 2013 to 2015 and model 7,1 and 7,2 through 2017; the original drive is removed when the adapter is installed.

How can I verify the NVME drive is recognised after fitting the adapter in a MacBook Air 7,2?

After installation the NVME drive appears in Disk Utility and System Information under the NVME section, allowing macOS to format and boot from it.

Does the package include the NVME SSD or only the adapter hardware?

The box contains the PCB adapter, one M2 mounting screw and a small screwdriver; the NVME SSD itself must be purchased separately.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.