We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with silver PCIe connector and black finned heatsink on top

Fervit

Fervit M.2 NGFF PCIe 3.0 x4 NVMe Adapter with Heatsink

SKU CH-DJPF-0BNC8

Adds an M.2 NVMe SSD to a desktop or laptop via PCIe 3.0 x4 with a built-in heatsink

  • Add an NVMe SSD to any desktop or laptop via PCIe 3.0 x4
  • Works immediately with no driver installation required
  • Fits 2242, 2260 and 2280 M.2 form factors
  • Designed for M.2 Socket 3 PCIe-based NVMe modules
  • Compatible with Windows, Mac and Linux operating systems

PCIe 3.0 x4 NVMe adapter

The Fervit adapter lets you install an M.2 NVMe SSD into a desktop or laptop through a standard PCI Express 3.0 x4 slot. It accepts 2242, 2260 and 2280 form-factor modules that use the M.2 Socket 3 PCIe interface. The card is transparent to the operating system and requires no additional drivers.

Heatsink thermal management

An integrated heatsink draws heat away from the SSD during normal operation, helping to keep temperatures lower than a bare card would run. The passive design adds no fan noise and draws no extra power beyond the slot supply. This keeps the drive within its thermal envelope for everyday workloads.

Sustained load behaviour

Under prolonged heavy transfers the heatsink continues to dissipate heat passively, reducing the likelihood of thermal throttling compared with an uncooled adapter. Performance remains consistent as long as chassis airflow is adequate. The adapter suits users who need NVMe speeds on a PCIe 3.0 platform; it does not serve builders who require PCIe 4.0 or 5.0 bandwidth.

Highlights

  • Add an NVMe SSD to any desktop or laptop via PCIe 3.0 x4
  • Works immediately with no driver installation required
  • Fits 2242, 2260 and 2280 M.2 form factors
  • Designed for M.2 Socket 3 PCIe-based NVMe modules
  • Compatible with Windows, Mac and Linux operating systems

Specifications

BrandFervit

Questions about this item

How do I install the Fervit M.2 adapter into a desktop PCIe x4 slot and which screw hole matches my 2280 SSD?

Insert the card into a PCIe 3.0 x4 slot, secure the bracket screw, then mount your M.2 2242, 2260 or 2280 drive onto the standoff that lines up with its length and fasten the tiny retaining screw.

What maintenance will the onboard heatsink need over time?

The passive heatsink has no moving parts; simply blow dust from its fins with compressed air every few months to keep thermal performance steady.

What is the first bottleneck I will hit during sustained heavy writes with this PCIe 3.0 x4 adapter?

The PCIe 3.0 x4 interface caps sequential throughput at the bus limit, so sustained write speeds cannot exceed that ceiling regardless of the NVMe drive installed.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.