Fervit M.2 Key M to PCIe 3.0 x4 Extension Cable 90° Right Angle

Fervit M.2 Key M PCIe 3.0 Extension Cable

This Fervit adapter connects an M.2 Key M solid-state drive to a motherboard PCIe 3.0 x4 slot using a 90° right-angle connector. German-patented wire and Taiwanese connectors maintain high-frequency signal integrity across the link. The cable accepts M.2 modules in 2230, 2242, 2260 and 2280 lengths. It is designed for builders who need to relocate an NVMe drive away from the M.2 socket.

Suits compact builds needing remote drive placement

The extension requires a free M.2 Key M slot on the host board and an open PCIe x4, x8 or x16 slot for the remote end. Systems without a Key M interface cannot use this cable. Builders who need to connect Key B or Key B+M modules should look at a different adapter. The right-angle PCIe plug helps in tight chassis but may not clear every low-profile bracket.

Sustained PCIe 3.0 x4 throughput under load

German-patented wiring and high-quality connectors preserve signal quality during continuous data transfers at the PCIe 3.0 x4 rate. The free-edge PCIe slot edge accommodates x1 through x16 cards without mechanical interference. Operating-system support spans Windows 10, 8, 7, 2000 and Linux, so driver behaviour remains consistent during extended workloads. Thermal performance depends on the drive and chassis airflow rather than the cable itself.