Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Fervit
Connects an M.2 Key M NVMe drive to a PCIe 3.0 x16 slot with a 180° angled connector, supporting 2230, 2242, 2260 and 2280 form factors
This adapter connects an M.2 Key M NVMe drive to a full-size PCIe 3.0 x16 slot using a 180-degree extension cable. It is designed for builders who need to install an M.2 drive on a motherboard that lacks an onboard M.2 Key M slot but has a free PCIe x16 slot available.
The flexible cable routes the M.2 drive away from the slot at a 180-degree angle, helping clearance in tight chassis layouts. The M.2 connector accepts 2230, 2242, 2260 and 2280 form-factor drives, so various drive lengths can be mounted without interfering with adjacent expansion cards or motherboard components.
The link operates at PCIe 3.0 speeds and is electrically wired for x16 mechanical slots, though the M.2 Key M drive itself typically uses up to four lanes. Bandwidth is therefore limited by the drive's own lane count and the PCIe 3.0 standard, not the x16 slot width. The host system must provide an M.2 Key M slot on the mainboard for the adapter to function.
| Brand | Fervit |
|---|
The cable carries a PCIe 3.0 x16 link, so the host slot and the add-in card negotiate up to Gen 3 across sixteen lanes; the M.2 Key M source on the motherboard will typically provide fewer lanes, and the cable simply passes through whatever the platform allocates.
The right-angle connector adds roughly 180 mm of cable length before the bend, so allow at least that much depth from the motherboard M.2 slot to the side panel or drive cage, plus the height of the installed expansion card.
Insert the M.2 Key M plug into the motherboard slot at the correct angle, secure it with the retention screw, then seat the x16 card into the 180° connector; the step people forget is fastening the M.2 screw before powering on, which prevents the plug from lifting under cable tension.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?