We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Low-profile PCIe card with two M.2 NVME slots

Fervit

Fervit Low Profile Dual NVME M.2 to PCIe Gen4 x8 x16 RAID Card

SKU CH-NED0-3KHXE

Low-profile PCIe Gen4 x16 card holds two NVMe M.2 SSDs and supports VROC RAID 0 on bifurcation-capable motherboards

  • Fits 1U servers with low-profile bracket
  • Dual NVME M.2 slots run at full speed together
  • On-board high-power DC modules keep both drives stable
  • VROC RAID 0 supported on Win 10/11 with CPU VMD
  • Requires motherboard PCIe bifurcation to see both SSDs

Low-Profile Dual NVME Adapter

The Fervit Low Profile Dual NVME M.2 to PCIe Gen4 x8 x16 RAID Card installs two NVME SSDs into a single PCIe slot. Its low-profile bracket fits 1U chassis where space around the slot is limited. The card carries no hardware RAID controller; it relies on the host platform for drive management. Two drives can operate at full speed simultaneously when the platform provides the necessary PCIe lanes.

Suits bifurcation-ready platforms.

This adapter only works on motherboards that support PCIe bifurcation so the x16 slot can be split into two x8 links. Without bifurcation the board will see only one of the two installed SSDs. It is designed for Windows 10 or 11 systems that can create VROC soft RAID volumes, or for users who prefer third-party software RAID. Builders whose platforms lack bifurcation or VROC support should look at a single-drive riser instead.

Two-drive capacity with full Gen4 x8 bandwidth each

Each NVME drive receives a dedicated PCIe Gen4 x8 connection, giving both drives full Gen4 x8 bandwidth at the same time. Onboard high-power DC modules deliver stable power for sustained dual-drive workloads. The card holds two M.2 NVME SSDs and does not add any hardware RAID overhead. Storage headroom is therefore limited to the two installed drives and the RAID mode configured in the operating system.

Highlights

  • Fits 1U servers with low-profile bracket
  • Dual NVME M.2 slots run at full speed together
  • On-board high-power DC modules keep both drives stable
  • VROC RAID 0 supported on Win 10/11 with CPU VMD
  • Requires motherboard PCIe bifurcation to see both SSDs

Specifications

BrandFervit

Questions about this item

Does my motherboard need PCIe bifurcation to use both M.2 slots on this card?

Yes, the card requires a motherboard with bifurcation support to split the PCIe lanes; without it only one NVME drive will be recognised.

Can I run two NVME drives at full PCIe Gen4 speed simultaneously with this adapter?

The dual NVME design allows both drives to operate at full speed at the same time when the motherboard provides bifurcated PCIe channels.

How do I confirm the VROC RAID 0 array is active after installing the card in Windows 10 or 11?

Open the Intel VROC utility or Disk Management and verify the array appears as a single volume with the combined capacity of both NVME drives.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.