We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black IEC C14 male to C13 female 90 degree right angle power adapter

Fervit

Fervit IEC C14 to C13 90 Degree Up/Down Right Angle Power Adapter

SKU CH-BKBP-ZK76M

Right-angled IEC C14 to C13 adapter rated 10 A at 250 V fits tight spaces by directing the cable up or down

  • Fits tight spaces with 90-degree up or down angled design
  • Handles up to 10A at 250V for reliable power delivery
  • Connects IEC 320 C14 male to C13 female for standard equipment compatibility
  • Three-pole configuration ensures secure ground connection
  • Right-angle layout reduces cable strain in confined rack or desk setups

IEC C14 to C13 90-degree adapter

This right-angled adapter converts an IEC C14 inlet to a C13 outlet, routing the cable upward or downward to fit tight clearances behind racks, UPS units or desktop power supplies. It is rated for 10 A at 250 V and suits any device that uses a standard IEC 320 C13 power cord. The compact moulded body adds minimal depth while keeping the connection secure.

Replaces a straight C13 plug when rear access is

Use this adapter when a straight cable would press against a wall, cabinet door or adjacent hardware and risk bending the cord or stressing the inlet. The 90-degree turn eliminates that strain and lets you route the lead neatly along the chassis. It is not for situations where the cable must exit sideways or where a longer reach is needed; a short extension cord would be the better choice there.

Limited to IEC 320 C14/C13 10 A 250 V circuits

The adapter only works with equipment fitted with a C14 inlet and a C13 cord, and it cannot carry more than 10 A at 250 V. It provides no voltage conversion, surge protection or filtering, so it must not be used on loads that exceed its rating or on non-IEC power systems. Polarity follows the IEC standard; reversing the adapter is not possible because the C14 and C13 connectors are keyed differently.

Highlights

  • Fits tight spaces with 90-degree up or down angled design
  • Handles up to 10A at 250V for reliable power delivery
  • Connects IEC 320 C14 male to C13 female for standard equipment compatibility
  • Three-pole configuration ensures secure ground connection
  • Right-angle layout reduces cable strain in confined rack or desk setups

Specifications

BrandFervit

Questions about this item

How much clearance does the 90-degree IEC C14 to C13 adapter need behind the device port?

The right-angle design lets the cable exit upward or downward, so it fits where a straight plug would hit a wall or rack rail — just verify which direction your chassis allows.

Which way should I orient the 90-degree IEC C14 to C13 adapter when plugging it in?

Check the equipment’s C14 inlet first; the adapter’s fixed 90-degree angle routes the C13 lead either up or down, so choose the orientation that keeps the cable clear of neighbouring ports or vents.

Does the 10 A 250 V IEC 320 C14 to C13 adapter need any periodic maintenance?

No scheduled upkeep is required; simply inspect the pins and housing for heat discolouration or looseness during routine hardware checks and replace the unit if damage appears.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.