We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Fervit

Fervit HDMI to DisplayPort Cable 118 Inches

SKU CH-X9MH-QPVS9

Connects HDMI sources to DisplayPort displays at 4K 60 Hz, 2K 144 Hz or 1080p 165 Hz with active conversion chip and USB power

  • 4K at 60 Hz with zero flicker for crisp visuals
  • 2K at 144 Hz plus 1080p at 165 Hz for smooth motion
  • Unidirectional HDMI to DisplayPort with built-in conversion chip
  • USB-powered plug-and-play design supports hot swapping
  • Gold-plated connectors resist oxidation across -30 °C to +75 °C

HDMI to DisplayPort Uni-Directional Cable

This 118-inch cable converts an HDMI source to a DisplayPort display using a built-in 6711 conversion chip. It supports 4K at 60Hz, 2K at 144Hz, and 1080P at 165Hz with synchronous audio and video. Gold-plated connectors resist oxidation while thickened wire ensures stable signal transmission across the full length. The cable operates reliably from -30°C to +75°C.

Upgrade from Passive Adapters

Passive HDMI-to-DisplayPort adapters cannot convert the signal protocol and will not work for this connection type. This active cable is worth it when you must drive a DisplayPort monitor from an HDMI-only laptop, desktop, PS5, or Xbox. The integrated chip handles the conversion without software drivers, delivering flicker-free output at supported refresh rates.

Check HDMI Source and USB Power

Verify your source device has an HDMI output and that the display accepts DisplayPort input. The conversion chip requires external power via the attached USB plug; connect it to a USB port on the source device or a separate USB power adapter. Ensure the USB port can supply sufficient current for the chip before ordering.

Highlights

  • 4K at 60 Hz with zero flicker for crisp visuals
  • 2K at 144 Hz plus 1080p at 165 Hz for smooth motion
  • Unidirectional HDMI to DisplayPort with built-in conversion chip
  • USB-powered plug-and-play design supports hot swapping
  • Gold-plated connectors resist oxidation across -30 °C to +75 °C

Specifications

BrandFervit

Questions about this item

How much clearance does the 118‑inch cable need behind the monitor for the DisplayPort connector?

The DisplayPort plug is a standard full‑size connector; allow roughly 3‑4 cm behind the panel so the cable can route without sharp bends.

Which end goes to the source and which to the display, and where does the USB power lead connect?

HDMI plug goes to the laptop, console or PC; DisplayPort plug goes to the monitor; the attached USB lead must be plugged into a USB‑A port or 5 V adapter to power the built‑in 6711 conversion chip.

Will the gold‑plated contacts or the 6711 chip need replacement after extended use at high refresh rates?

Gold‑plated connectors resist oxidation for the cable’s lifetime, and the 6711 chip is soldered inside the hood — no user‑serviceable parts or scheduled maintenance are required.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.