We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with adjustable knob, touch switch and LED display

Fervit

Fervit DC 13-24V to 3.3V 5V 12V 1.8-10.8V Adjustable Power Strip

SKU CH-1KSX-D6T0B

Converts 13-24V DC input into 3.3V, 5V, 12V and adjustable 1.8-10.8V outputs up to 3A with touch-switch control and LED voltage display

  • Converts 13-24 V DC to fixed 3.3 V, 5 V or 12 V rails
  • Adjustable 1.8-10.8 V output with 3 A maximum current for custom voltages
  • Touch sensor toggles output on and off while LED shows live voltages
  • Input reverse-connection protection guards against wiring mistakes
  • circuit protection shuts down safely during fault conditions

DC adjustable breakout board for prototyping

This breakout board converts a 13-24V DC source into fixed 3.3V, 5V and 12V rails plus an adjustable 1.8-10.8V output rated at 3A. It suits engineers and hobbyists who need multiple regulated voltages from a single bench supply or battery pack.

Touch sensor control with LED readout

A capacitive touch switch toggles the adjustable output on and off while an integrated LED panel shows live input and output voltages. When disabled the display reads OFF, giving instant visual confirmation without mechanical wear.

Reverse-polarity and short-circuit protection

Built-in safeguards block damage from accidental reverse connection and output shorts. The fixed rails remain stable during faults, so downstream modules stay powered while the adjustable channel recovers automatically.

Highlights

  • Converts 13-24 V DC to fixed 3.3 V, 5 V or 12 V rails
  • Adjustable 1.8-10.8 V output with 3 A maximum current for custom voltages
  • Touch sensor toggles output on and off while LED shows live voltages
  • Input reverse-connection protection guards against wiring mistakes
  • circuit protection shuts down safely during fault conditions

Specifications

BrandFervit

Questions about this item

How do I wire the DC 13-24V input and set the adjustable knob without reversing polarity?

Connect a DC source between 13V and 24V to the input terminals; the board includes reverse-connection protection. Turn the adjustable knob to select 1.8V-10.8V or choose the fixed 3.3V, 5V or 12V rails.

Will the touch sensor switch or LED display wear out and need replacement?

The touch sensor switch toggles output on and off and cycles the LED between input voltage, output voltage and OFF. No user-replaceable parts are specified for the switch or display.

At what load does the 3A current limit engage during continuous operation?

The adjustable 1.8V-10.8V output is rated for a maximum of 3A; sustained loads above that will trigger the short-circuit protection and shut the output down.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.