We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two small black circuit boards with horizontal USB 2.0 ports and 9-pin headers

Fervit

Fervit 9Pin 10Pin Motherboard Header to Dual USB 2.0 Adapter Horizontal Type

SKU CH-8ZBZ-F2SR7

Converts a 9Pin or 10Pin motherboard header to two USB 2.0 ports at 480 Mbps, includes Type-A and Type-B adapters

  • Add two USB 2.0 ports from a single 9-pin header
  • Ready to use with no drivers or configuration required
  • Transfers data at up to 480 Mbps with reliable signal quality
  • Powers and connects wireless, Bluetooth and mobile peripherals
  • Includes both Type-A and Type-B adapters for flexible installation

Dual USB 2.0 Header Adapters

This pair of Fervit adapters converts a motherboard 9-pin or 10-pin internal header into two standard USB 2.0 female ports. They suit PC builders adding front-panel or internal USB connections where space is tight. The horizontal layout and compact form factor simplify routing inside small chassis. Each unit is plug-and-play with no drivers required.

Type-A and Type-B Orientation

The package includes one Type-A and one Type-B adapter so the USB ports face opposite directions. This lets you route cables toward either side of the header without strain. Both adapters carry power and data to peripherals such as wireless dongles, Bluetooth modules, or mobile devices. The keyed 9-pin header prevents incorrect insertion.

USB 2.0 480 Mbps Limit

The USB 2.0 interface caps throughput at 480 Mbps, so high-bandwidth devices will run at reduced speed. The adapters only support USB 2.0 signalling; they cannot pass USB 3.x or higher protocols. Builders needing faster transfer rates must use a different header or controller. The 10-pin variant follows the same electrical specification.

Highlights

  • Add two USB 2.0 ports from a single 9-pin header
  • Ready to use with no drivers or configuration required
  • Transfers data at up to 480 Mbps with reliable signal quality
  • Powers and connects wireless, Bluetooth and mobile peripherals
  • Includes both Type-A and Type-B adapters for flexible installation

Specifications

BrandFervit

Questions about this item

Will the 9-pin header pins need periodic reseating or replacement?

The adapter is fully plug-and-play with no moving contacts, so the 9-pin header pins do not require periodic reseating or replacement under normal use.

What throughput ceiling appears first when the dual USB 2.0 ports run at 480 Mbps continuously?

The USB 2.0 interface itself caps sustained throughput at 480 Mbps, so that specification limit is reached before any adapter bottleneck.

How much extra heat or power draw does the adapter add when both ports transfer data all day?

The passive adapter adds negligible heat and draws only the standard USB 2.0 bus power, so continuous operation does not raise system temperature or power consumption noticeably.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.