We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear PMMA case showing 12 three-pin RGB ports with magnetic standoffs and 100cm cable

Fervit

Fervit 12 Way 5V RGB LED Splitter Hub with PMMA Case and Magnetic Standoff

SKU CH-PHEX-YBXZ1

Splits one 5V addressable RGB header into twelve connectors with a 100 cm cable, magnetic standoffs and a compact PMMA case

  • Connect 12 addressable RGB devices through one motherboard header
  • Magnetic standoff secures the hub inside the chassis without tools
  • 100 cm cable reaches across full-tower builds with ease
  • PMMA case protects the PCB while showing internal lighting
  • Compact 88.6 x 45.6 x 18.8 mm footprint fits tight spaces

12-Way 5V ARGB Splitter Hub

This 12-way hub splits a single 5V addressable RGB header into twelve 3-pin connectors. It lets builders run multiple ARGB fans or strips from one motherboard header. The unit is designed for 5V addressable devices only and will not work with 12V RGB components.

PMMA Case With Magnetic Standoffs

The hub is housed in a PMMA case measuring 88.6 x 45.6 x 18.8mm. Magnetic standoffs allow quick mounting inside a steel chassis without screws. A 100cm lead cable reaches the motherboard header from most case positions.

Sustained Operation And Alignment

Under continuous load the hub passes power and data to all connected devices without active cooling. Correct arrow alignment on every connector is required for proper signal transmission. Builders needing 12V RGB support or more than twelve ports should look elsewhere.

Highlights

  • Connect 12 addressable RGB devices through one motherboard header
  • Magnetic standoff secures the hub inside the chassis without tools
  • 100 cm cable reaches across full-tower builds with ease
  • PMMA case protects the PCB while showing internal lighting
  • Compact 88.6 x 45.6 x 18.8 mm footprint fits tight spaces

Specifications

BrandFervit

Questions about this item

Will the 88.6 mm by 45.6 mm PMMA case fit in my chassis?

The hub measures 88.6 mm long by 45.6 mm wide by 18.8 mm tall, so verify your case has at least that much flat area and clearance.

How do I mount the hub using the magnetic standoffs?

Peel the adhesive backing, press each standoff onto a clean metal surface inside the chassis, then let the magnets hold the hub in place — skipping the surface cleaning is the step most people miss.

When should I replace the 100 cm RGB cable?

Replace the cable if the insulation is cracked, the 3-pin connector pins are bent, or the addressable LEDs downstream start flickering or show wrong colours.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.