We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
100cm Mini SAS fanout cable, 36pin SFF8087 to four 29pin SFF8482 connectors with IDE power plug

Fervit

Fervit 100cm Mini SAS 4×SFF8087 to 4×SFF8482 Cable with IDE Power

SKU CH-19K7-ZZYC6

Fanout cable converts a 36pin SFF8087 Mini SAS host port to four 29pin SFF8482 SAS/SATA drive connectors with an IDE power plug for stable drive supply

  • Fanout design splits one SFF8087 36pin host port into four SFF8482 29pin drive connections
  • Integrated IDE power connector delivers stable power to attached drives reducing cable clutter
  • High-grade copper conductors maintain signal integrity for high-speed SAS data transfer with minimal loss
  • Designed for enterprise RAID controllers and multi-disk storage backplanes in server environments
  • 100cm length provides flexible routing inside large rackmount servers and storage enclosures

Connectivity & Interface

The Fervit 100cm Mini SAS cable connects a 36pin SFF8087 host port to four SFF8482 29pin SAS or SATA drive interfaces. An integrated IDE power connector supplies drive power directly from the cable, reducing internal wiring complexity in server chassis.

Suitable builds & limitations

This fanout cable suits administrators wiring enterprise RAID controllers or storage backplanes in multidisk servers where 100cm reach matches the chassis layout. It will not work for systems that use a different host connector pinout or drive interface, nor for installations that cannot accommodate an IDE power source.

Deciding specification

The single specification that determines fit is the 36pin SFF8087 to 4×SFF8482 29pin fanout wiring; the host side and each target side must match these exact connectors for the cable to function.

Highlights

  • Fanout design splits one SFF8087 36pin host port into four SFF8482 29pin drive connections
  • Integrated IDE power connector delivers stable power to attached drives reducing cable clutter
  • High-grade copper conductors maintain signal integrity for high-speed SAS data transfer with minimal loss
  • Designed for enterprise RAID controllers and multi-disk storage backplanes in server environments
  • 100cm length provides flexible routing inside large rackmount servers and storage enclosures

Specifications

BrandFervit

Questions about this item

Will the SFF8482 29pin connectors or IDE power plug need replacement after extended use?

The cable uses a highgrade copper wire harness for low signal loss and the builtin IDE power connector supplies stable power; no periodic replacement of the 29pin or 36pin connectors is required under normal server operation.

What limits sustained data throughput when the fanout cable runs continuously in a RAID array?

The 4channel SFF8087 36pin host interface and SFF8482 29pin target links set the signalling ceiling; the copper harness is designed for highspeed SAS transmission with low crosstalk so the controller and backplane determine the practical limit.

How much heat or noise does the 100cm cable add when drives spin all day?

The passive copper harness generates no noise and negligible heat; only the attached drives and RAID controller produce measurable warmth and sound during all-day operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.