FASCO
FASCO D405 HVAC Motor 1/10 HP 3200 rpm 115V 3.3 in
1/10 HP HVAC motor runs at 3200 rpm on 115 V with a 3.3 in frame and 36 in leads
- typeClosed Base
- 1/10 HP delivers reliable HVAC airflow
- 3200 rpm single-speed operation simplifies installation
- 115 V AC compatible with standard household circuits
- 3 inch frame fits common motor housings
- 36 inch leads provide flexible wiring reach
HVAC Motor for Air-Over Applications
This FASCO D405 motor is a single-phase permanent split capacitor unit rated at 1/10 HP and 3200 rpm. It operates on 115V AC at 60 Hz and draws 1.00 full-load amps. The open air-over enclosure requires airflow from the driven fan for cooling. It suits residential or light-commercial HVAC equipment needing a direct OEM replacement.
Verify Voltage Wiring and Mounting Clearance
Confirm the supply circuit is 115V AC; the motor is not usable at 200V or 208V. Ensure the mounting location accepts the extended-stud pattern and allows all-angle orientation. Check that the 3.3 in frame diameter fits the existing housing and that the 36 in lead length reaches the junction box without splicing.
Open Enclosure with Auto Thermal Protection
The open air-over design relies on the blower wheel to move cooling air across the windings. Class B insulation and automatic thermal protection shut the motor down if the ambient temperature exceeds 40 degrees C. The single shaft rotates CW or CCW for flexible installation, and the closed base keeps debris off the bearing.
Highlights
- 1/10 HP delivers reliable HVAC airflow
- 3200 rpm single-speed operation simplifies installation
- 115 V AC compatible with standard household circuits
- 3 inch frame fits common motor housings
- 36 inch leads provide flexible wiring reach
Specifications
| Brand | FASCO |
|---|---|
| type | Closed Base |
Questions about this item
Does the FASCO D405 motor ship with a capacitor, mounting hardware or a wiring harness, or do I need to buy those separately?
The motor is supplied as the motor unit only; a permanent-split capacitor, mounting brackets and any connectors are not included and must be sourced separately.
The listing shows a single 1/10 HP, 3200 rpm, 115 V version — are there other horsepower, speed or voltage options for the D405?
Only the 1/10 HP, 3200 rpm, 115 V AC, single-speed model is offered under the D405 part number; no alternative horsepower, rpm or voltage variants exist for this model.
What does the 1.00 A full-load current mean for circuit sizing when the motor is installed in an HVAC unit?
At full load the motor draws 1.00 A on a 115 V, 60 Hz supply, so the branch circuit and overload protection should be sized for at least that current with the usual safety margin.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



