We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small silver steel HVAC motor with stud mount and open vents

FASCO

FASCO D332 HVAC Motor 1/25 HP 1550 rpm 115V 3.3 Frame

SKU CH-WAND-T9R0H

Replacement shaded-pole HVAC motor delivering 1/25 hp at 1550 rpm on 115 V AC, 3.3 frame with dual-speed operation and auto thermal protection

  • typeClosed Base
  • 1/25 HP motor delivers reliable HVAC airflow
  • 1550 RPM shaded-pole design runs on standard 115 V power
  • Two-speed operation matches varying ventilation needs
  • Auto thermal protection safeguards motor during overload
  • 3 frame steel construction fits common stud-mount openings

HVAC Shaded-Pole Motor for Fan

The FASCO D332 is a single-phase shaded-pole motor rated at 1/25 hp with a nameplate speed of 1550 rpm. It operates on 115 V AC at 60 Hz and draws 1.5 A at full load. The 3.3 frame uses steel construction with an open air-over enclosure and stud mounting. It is not usable at 200 V or 208 V.

Thermals and Electrical Draw in Normal Operation

The motor carries a 1.0 service factor and Class B insulation with automatic thermal protection. Maximum ambient temperature is 40 degrees C. Output power is 30 W. The closed-base design and open air-over enclosure rely on the application airflow for cooling during continuous duty.

Two-Speed CWSE Rotation Decides Fit

This unit provides two selectable speeds and a fixed clockwise shaft-end rotation. Buyers who need counter-clockwise rotation, a different speed count, or voltage compatibility at 200 V or 208 V cannot use this motor. Verify the required rotation and speed configuration before purchase.

Highlights

  • 1/25 HP motor delivers reliable HVAC airflow
  • 1550 RPM shaded-pole design runs on standard 115 V power
  • Two-speed operation matches varying ventilation needs
  • Auto thermal protection safeguards motor during overload
  • 3 frame steel construction fits common stud-mount openings

Specifications

BrandFASCO
typeClosed Base

Questions about this item

How is the FASCO D332 motor installed and what step is often missed?

The motor mounts via studs on a 3.3 frame; the step often missed is verifying the shaft rotation is CWSE before final tightening.

What maintenance or replacement will the FASCO D332 motor need later?

With auto thermal protection and Class B insulation rated for 40 °C ambient, the main future need is bearing lubrication or replacement if noise develops.

What limit appears first on the FASCO D332 under sustained use?

The 1.0 service factor means the motor cannot exceed its 1/25 hp / 30 W rating continuously; overheating protection will trip first at 40 °C ambient.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.