We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small cylindrical HVAC motor with open drip-proof enclosure and stud mounting

FASCO

FASCO D201 HVAC Motor 1/100 HP 3000 rpm 115V 3.3 Frame

SKU CH-4GNK-Z6SMC

Single-phase shaded-pole HVAC motor delivers 1/85 HP at 3000 RPM on 115 V AC with 3.3 frame and 130 W output

  • typeClosed Base
  • Compact shaded-pole motor fits 3.3 frame openings
  • 1/85 hp delivers 130 W for small HVAC fans
  • Auto thermal protection prevents overheating up to 40 °C
  • 35 service factor handles continuous duty at 3000 rpm
  • 115 V single-phase runs on standard household circuits

Motor Specification

The FASCO D201 is a shaded-pole HVAC motor rated at 1/100 HP and 3000 rpm on 115V AC. It delivers 130 W output with a 1.35 service factor and runs continuously at up to 40 °C ambient.

Fitment Scope

The 3.3 frame and stud mounting suit direct-drive blower or fan assemblies that accept a 0.69 A single-speed motor. Builds needing variable speed, higher torque, or 208 V operation must select a different design.

Installation Context

Open drip-proof enclosure and auto thermal protection allow placement in ventilated equipment compartments. CW/CCW rotation flexibility simplifies alignment with existing wheel or blade assemblies without rewiring.

Highlights

  • Compact shaded-pole motor fits 3.3 frame openings
  • 1/85 hp delivers 130 W for small HVAC fans
  • Auto thermal protection prevents overheating up to 40 °C
  • 35 service factor handles continuous duty at 3000 rpm
  • 115 V single-phase runs on standard household circuits

Specifications

BrandFASCO
typeClosed Base

Questions about this item

What voltage supply must I already have for this 115V motor to operate?

You need a 115V AC, 60 Hz single-phase supply; the motor is not usable at 200V or 208V.

Will this 3.3 frame motor fit the stud mounting pattern on my existing blower housing?

The motor uses a stud mounting type on a 3.3 frame; match the stud spacing and shaft dimensions to your current housing.

How can I confirm the motor is running correctly after installation?

Verify the shaft spins at 3000 RPM clockwise or counter-clockwise, draws about 0.69 amps at full load, and the housing stays below 40 °C ambient.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.