FASCO
FASCO D182 HVAC Motor 1/60 HP 1500 RPM 115V 3.3 Frame Fan Accessory
A shaded-pole HVAC motor delivers 1/60 hp at 1500 RPM on 115 V AC with a 3.3 frame and automatic thermal protection
- typeClosed Base
- 1/60 HP shaded-pole motor delivers 10 W output for light-duty HVAC airflow
- 1500 RPM single-speed design provides steady rotation at 60 Hz
- 115 V AC operation draws only 0.60 A at full load
- Totally enclosed air-over frame runs safely up to 40 °C ambient
- Auto thermal protection and Class B insulation protect windings from overheating
HVAC Replacement Motor 1/60 HP
This FASCO D182 motor is a single-phase shaded-pole unit rated at 1/60 horsepower and 1500 RPM on 115V AC. It draws 0.60 amps at full load and delivers 10 watts of output. The 3.3 frame uses a closed-base steel construction with stud mounting for direct installation in compatible HVAC equipment.
Upgrade From Worn Shaded-Pole Units
The motor replaces failed shaded-pole motors of the same 3.3 frame, voltage and speed rating. The jump is worth it when the original motor shows bearing noise, overheating or failure to start under load. Auto thermal protection and Class B insulation help prevent repeat burnout in continuous air-over duty.
Suits Technicians Servicing 115V Air-Over
It suits maintenance crews needing a direct-stud mount replacement for 115V 60 Hz systems operating up to 40 °C ambient. Buyers requiring 200V or 208V operation should look elsewhere because this model is not usable at those voltages. Multi-speed or reversible rotation needs are also not met by this single-speed clockwise design.
Highlights
- 1/60 HP shaded-pole motor delivers 10 W output for light-duty HVAC airflow
- 1500 RPM single-speed design provides steady rotation at 60 Hz
- 115 V AC operation draws only 0.60 A at full load
- Totally enclosed air-over frame runs safely up to 40 °C ambient
- Auto thermal protection and Class B insulation protect windings from overheating
Specifications
| Brand | FASCO |
|---|---|
| type | Closed Base |
Questions about this item
What does the 3.3 frame size mean for mounting this motor?
The 3.3 frame indicates the motor uses stud mounting with a steel frame, designed to bolt directly to compatible HVAC housings using the integral studs.
How do I wire the 115V shaded-pole motor correctly on installation?
Connect the two leads to a 115V AC, 60 Hz supply; the shaded-pole design sets rotation to clockwise when viewed from the shaft end, so verify airflow direction before securing.
When should I plan to replace the motor given its thermal protection and insulation class?
The auto-reset thermal protection and Class B insulation rated for 40 °C ambient allow continuous operation; replace if the motor trips repeatedly or shaft bearings become noisy.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



