We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small cylindrical motor with extended mounting studs and wire leads

FASCO

FASCO D1134 Motor 1/50-1/65-1/80 HP 115V CW

SKU CH-G8QM-F0Z4M

Multi-speed shaded-pole motor delivers 1/50, 1/65 or 1/80 HP at 115 V for fan replacements

  • typeClosed Base
  • OEM replacement motor fits original equipment
  • Three-speed shaded-pole design delivers flexible airflow
  • 115 V AC single-phase power suits standard wiring
  • Auto thermal protection guards against overheating
  • All-angle mounting with extended studs simplifies installation

OEM Replacement Motor for Fan Accessories

This FASCO D1134 motor serves as an OEM replacement part for compatible fan accessories. It operates on 115V AC single-phase power with a shaded pole design. The motor provides three selectable speed settings for airflow control. It mounts in any position using extended studs for versatile installation.

Multi-Horsepower Range 1/50 to 1/30 HP

The motor delivers three distinct horsepower ratings of 1/50, 1/65, and 1/30 HP to match specific load requirements. Full load amps measure 1.10, 0.80, and 0.60 respectively across the three speeds. Nameplate RPM is 1,300 at 60 Hz frequency. This exact horsepower match determines whether the motor fits the original equipment specification.

Continuous Operation at 40°C Ambient

Thermal protection is automatic and the insulation class is rated Class B for sustained duty. The open air-over enclosure requires external airflow from the fan blades for cooling during operation. Maximum ambient temperature is rated at 40 degrees Celsius for continuous service. The 1.0 service factor indicates no overload capacity beyond nameplate ratings.

Highlights

  • OEM replacement motor fits original equipment
  • Three-speed shaded-pole design delivers flexible airflow
  • 115 V AC single-phase power suits standard wiring
  • Auto thermal protection guards against overheating
  • All-angle mounting with extended studs simplifies installation

Specifications

BrandFASCO
typeClosed Base

Questions about this item

What does the 1/50 to 1/30 HP range mean for airflow once installed?

The motor delivers three speed taps at 1/50, 1/65 and 1/30 horsepower so the blower can run at low, medium or high output depending on the furnace or fan coil design.

How does the 115 V shaded-pole design limit speed control?

As a single-phase shaded-pole motor it runs at a fixed 1 300 RPM nameplate speed on each tap; voltage reduction or external speed controllers are not supported by this design.

Will the 3.3 inch frame and extended studs fit my existing blower housing?

The 3.3 inch diameter frame with extended stud mounting and all-angle orientation matches many OEM blower housings; verify the stud pattern and shaft diameter before ordering.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.