We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small cylindrical steel HVAC motor with stud mounting visible

FASCO

FASCO D1119 HVAC Motor 3.3 In 1/90 HP 240V CCW

SKU CH-66Y2-6BZHW

Replacement shaded-pole motor rated 1/90 hp at 240 V with 300 RPM and CCW rotation

  • typeClosed Base
  • OEM replacement motor fits existing HVAC units
  • 1/90 HP shaded-pole design delivers 10 W output
  • 240 V AC single-phase supply with 0.4 A draw
  • Auto thermal protection guards against overheating
  • CCW shaft rotation suits direct-drive fan assemblies

Replacement HVAC Motor

The FASCO D1119 is a shaded-pole motor built as an OEM replacement for HVAC equipment. It operates on single-phase 240 V AC power at 60 Hz and turns counter-clockwise when viewed from the shaft end.

1/90 HP Output and Thermal Limits

Rated at 1/90 HP and 10 W output, the motor draws 0.4 A at full load and runs at 300 RPM. Auto thermal protection and Class B insulation allow operation up to a 40 °C ambient temperature, but the unit is not usable at 208 V or 200 V supplies.

3.3-Inch Frame with Stud Mounting

The 3.3 frame uses a closed-base steel housing and an open air-over enclosure. Stud mounting fixes the motor in place, so the installer must verify that the existing bracket matches this pattern.

Highlights

  • OEM replacement motor fits existing HVAC units
  • 1/90 HP shaded-pole design delivers 10 W output
  • 240 V AC single-phase supply with 0.4 A draw
  • Auto thermal protection guards against overheating
  • CCW shaft rotation suits direct-drive fan assemblies

Specifications

BrandFASCO
typeClosed Base

Questions about this item

Will the 3.3 inch frame and stud mounting match the bracket on my existing furnace blower?

The motor uses a 3.3 frame with stud mounting; verify your blower housing accepts this frame size and stud pattern before installation.

How can I confirm the motor is running correctly once wired to 240V?

At 240V AC the motor should draw about .4 amps at full load and turn at 300 RPM in a CCW direction when viewed from the shaft end.

Does the box include a capacitor or mounting hardware, or must I buy them separately?

The motor is supplied as an open air‑over unit with a closed base; no capacitor, mounting bolts or wiring harness are included.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.