We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black metal axial fan with wire guard and terminal box, 200 mm diameter

Fans

Fans W2E200-HH38-12 Axial Fan 230V 2800RPM 200mm

SKU CH-VDDH-4D4AF

230 V AC axial fan with die-cast aluminium housing, motor stall protection and IP20 rating runs at 2800 RPM delivering up to 35000 m³/h airflow

  • 230 V AC operation for direct mains connection
  • 2800 RPM at 60 Hz delivers strong airflow
  • Die-cast aluminium housing resists vibration and heat
  • Motor stall protection prevents damage under load
  • IP20 rating shields internal parts from finger contact

Axial Fan 200 mm 230 V AC

The ebm-papst W2E200-HH38-12 is a 200 mm AC axial fan designed for forced-air cooling in industrial equipment such as ABB inverters. It operates directly from 230 V single-phase mains at 50 Hz or 60 Hz and uses a terminal-block power connection. The die-cast aluminium housing provides IP20 protection and motor stall protection for safe continuous operation.

Sustained Load Behaviour

At 50 Hz the fan runs at 2550 rpm drawing 64 W and 0.29 A, while at 60 Hz it reaches 2800 rpm with 80 W and 0.35 A. Maximum back pressure is rated at 100 Pa at 50 Hz and 120 Pa at 60 Hz, allowing consistent airflow up to 35000 m³/h under load. Ambient temperature range spans -25 °C to 60 °C at 50 Hz and -25 °C to 65 °C at 60 Hz, with a 1.5 µF 400 VDB capacitor fitted for stable running.

Replacement and Upgrade Context

This unit suits maintenance of existing 230 V AC cooling systems where a 200 mm frame and terminal connection are required. It is not intended for low-voltage DC builds, PWM speed control or standard PC case mounting. Buyers needing variable-speed control or 12 V operation should select a different fan type.

Highlights

  • 230 V AC operation for direct mains connection
  • 2800 RPM at 60 Hz delivers strong airflow
  • Die-cast aluminium housing resists vibration and heat
  • Motor stall protection prevents damage under load
  • IP20 rating shields internal parts from finger contact

Specifications

No published specifications for this item yet.

Questions about this item

How much power does the 230 V W2E200-HH38-12 draw when running continuously at 2800 RPM?

At 60 Hz the fan draws 80 W and 0.35 A, rising to 85 W and 0.36 A at the upper tolerance; starting current is 0.54 A.

What must I already have to install this 200 mm axial fan?

A 230 V AC supply, a 1.5 µF 400 VDB run capacitor, and terminal connectors for the power leads.

Will this fan fit the same 200 mm cut-out and mounting holes as my existing ebm-papst W2E200 unit?

Yes — it shares the W2E200 series die-cast aluminium housing and 200 mm frame dimensions, so the cut-out and hole pattern match.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.