We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square black frame fan 170mm wide 50mm deep three-wire 220V AC

Fans

Fans U6250MK-TP 150*55 220V 3-wire case fan

SKU CH-2F7B-KFZV9

A 220 V three-wire case fan measuring 150 mm by 55 mm delivers 130 CFM airflow at 3500 RPM with 39 dB(A) noise

  • 220 V AC power suits industrial mains supply
  • 130 CFM airflow moves 2.5 m³/min for strong cooling
  • 39 dB(A) noise keeps acoustic impact low
  • 28 W draw at 0.01 A rated current limits energy use
  • 530 g mass fits standard 150×55 mm mounting footprint

High-temperature AC axial fan

The IKURAU U6250MK-TP is a brand-new 220 V AC axial fan measuring 170 mm by 50 mm with a three-wire connection. It delivers 130 CFM of airflow at a rated speed of 3500 min⁻¹ while consuming 28 W of power. Noise output is specified at 39 dB(A) and the unit weighs 530 g.

Suited for industrial mains-powered cooling

This fan suits equipment builders and maintenance teams who need a direct 220 V AC cooling source for medical devices, rail vehicles, industrial drives or similar mains-fed enclosures. It is not suitable for builders who require a low-voltage DC fan for standard PC motherboard headers or PWM speed control.

220 V AC rated voltage decides compatibility

The single specification that determines fit is the 220 V AC rated voltage combined with the three-wire AC interface. Only systems that supply mains voltage and match the 170 mm by 50 mm mounting footprint can use this fan without additional conversion hardware.

Highlights

  • 220 V AC power suits industrial mains supply
  • 130 CFM airflow moves 2.5 m³/min for strong cooling
  • 39 dB(A) noise keeps acoustic impact low
  • 28 W draw at 0.01 A rated current limits energy use
  • 530 g mass fits standard 150×55 mm mounting footprint

Specifications

No published specifications for this item yet.

Questions about this item

Will the 170 mm by 50 mm square frame fit my 150 mm by 55 mm mounting holes?

The fan body measures 170 mm by 50 mm, so verify your chassis cut-out matches those outer dimensions before ordering.

How do I connect the three wires on a 220 V AC supply without reversing line and neutral?

Connect the three leads to live, neutral and ground exactly as marked on the housing; the tachometer wire carries only a speed signal and must not be used for power.

When should I plan to replace the bearings on a fan rated at 3500 min⁻¹ and 39 dB(A)?

Expect bearing wear to raise noise above the rated 39 dB(A) after several years of continuous 3500 min⁻¹ operation; replace when vibration or noise becomes noticeable.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.