We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square black 172 mm AC case fan with metal frame and seven curved blades

Fans

Fans SK162AP 220 V 172 mm 190 CFM case fan

SKU CH-Z7KB-BGNYB

220 V 172 mm case fan delivering 190 CFM airflow at 36–40 W motor power

  • High airflow at 190 CFM moves heat fast
  • 172 mm blade fits many chassis
  • 220 V AC power plugs straight into mains
  • Dual 36 W / 40 W motor adapts to load
  • 30 A draw keeps circuit load low

AC case fan for industrial chassis

The Fans SK162AP is a 220 V axial fan built for 172 mm mounting holes in server racks, medical equipment and industrial enclosures. It delivers 190 CFM airflow at 230 V nominal voltage for continuous-duty cooling.

Sustained airflow at rated power

At 230 V the motor draws 0.30 A and runs at 40 W or 36 W depending on load, maintaining 190 CFM without throttling. The AC design avoids PWM curves so output stays flat across long shifts in rail, telecom or HVAC cabinets.

Screw-mount installation with polarity care

Four corner holes accept standard M4 screws for direct panel mounting. The 220 V AC supply requires correct live-neutral wiring and earth grounding; reversing polarity or using a DC source will damage the motor.

Highlights

  • High airflow at 190 CFM moves heat fast
  • 172 mm blade fits many chassis
  • 220 V AC power plugs straight into mains
  • Dual 36 W / 40 W motor adapts to load
  • 30 A draw keeps circuit load low

Specifications

No published specifications for this item yet.

Questions about this item

How much power does the SK162AP draw when running continuously at 230 V?

The motor is rated at 40 W or 36 W depending on operating point, with a current draw of 0.30 A at 230 V.

What mounting provision must the chassis provide for this 172 mm blade fan?

The fan requires a 172 mm diameter cut-out and matching screw holes for secure installation.

Can the 230 V AC SK162AP be controlled by a standard PWM fan header on a motherboard?

No, the unit operates directly on 230 V AC mains and is not compatible with low-voltage PWM headers.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.