We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Centrifugal fan with black metal housing and curved blades, 560mm diameter

Fans

Fans R6D560-AH05-01 power inverter

SKU CH-RHAV-42839 MPN R6D560-AH05-01

A 560 mm centrifugal fan delivering 890 RPM at 50 Hz for Schneider inverter cooling

  • Reliable cooling for inverters with 890 RPM centrifugal airflow
  • IP54 protection withstands dust and moisture in industrial environments
  • 560 mm blade diameter moves high air volume for drive cooling
  • Dual-voltage 230/400 V operation suits varied power supplies
  • German ebmpapst engineering ensures consistent performance in medical and rail applications

Centrifugal fan for Schneider inverter

The Fans R6D560-AH05-01 is a Germany ebmpapst centrifugal fan built for Schneider inverter drive cooling. It suits industrial cleaning, medical equipment, rail vehicles, hotel installations and new-energy vehicle systems. The unit is supplied new and supports custom processing for specialised integration.

Electrical and mounting checks before ordering

Verify that the supply voltage matches 230/400 V at 50 Hz and that the motor power rating of 780/800 W fits the inverter specification. Confirm the blade diameter of 560 mm clears the enclosure and that the IP54 protection rating meets the environmental demands of the installation site.

Thermals noise and power draw in normal use

The fan runs at 890/910 min-1 drawing 1.68-2.9 A to deliver the rated airflow for drive cooling. IP54 sealing limits ingress without adding restrictive ducting, so thermal performance stays stable in dusty or humid conditions. Power consumption scales with the 780/800 W motor rating during continuous operation.

Highlights

  • Reliable cooling for inverters with 890 RPM centrifugal airflow
  • IP54 protection withstands dust and moisture in industrial environments
  • 560 mm blade diameter moves high air volume for drive cooling
  • Dual-voltage 230/400 V operation suits varied power supplies
  • German ebmpapst engineering ensures consistent performance in medical and rail applications

Specifications

No published specifications for this item yet.

Questions about this item

Does the box contain only the ebmpapst R6D560-AH05-01 centrifugal fan, or are mounting brackets and wiring harnesses included?

The listing describes the fan unit itself: a 560 mm blade diameter centrifugal model rated for 50 Hz operation at 230/400 V with IP54 protection. No brackets, cables or additional accessories are mentioned in the supplier data.

Should I choose the 780 W or 800 W motor power rating for my Schneider inverter application?

The fan specifies a dual motor power of 780/800 W, corresponding to the two speed points of 890/910 min⁻¹. Select the lower figure for the 890 min⁻¹ operating point and the higher for 910 min⁻¹; both are inherent to the same unit.

What does the 1.68–2.9 A current range mean for day-to-day running in a drive-cooling cabinet?

At the 890 min⁻¹ speed the fan draws about 1.68 A, rising to roughly 2.9 A at 910 min⁻¹. Your supply and protection devices must handle the peak 2.9 A continuously while the higher speed is active.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.