Fans
Fans R2E225-BA47-11 230V 0.63/0.9A full metal case fan
German-engineered centrifugal fan delivers up to 35000 m³/h airflow in a full metal housing rated for -25 °C to 75 °C operation
- Runs at 230 V for direct mains operation
- Delivers up to 35000 m³/h airflow for high-volume cooling
- Withstands ambient temperatures from -25 °C to 75 °C for harsh environments
- Full metal housing ensures durability and structural rigidity
- Speed controlled via 0-100 % analog or serial interface
Industrial AC centrifugal fan
The Fans R2E225-BA47-11 is a 230 V single-phase centrifugal blower built around an external-rotor motor. It delivers airflow up to 35000 m³/h in a sturdy steel housing designed for continuous industrial use.
Check voltage frequency and current capacity
Verify that your supply provides 230 V AC at either 50 Hz or 60 Hz. The fan draws 0.63 A at 50 Hz and 0.9 A at 60 Hz with a 5 µF 400 V capacitor fitted. Ensure wiring and protection can handle 145 W to 205 W depending on frequency.
Suits fixed industrial ventilation not desktop PCs
This unit fits equipment builders who need high-volume forced cooling in cabinets or machinery where 230 V mains power is standard. It is not intended for low-voltage computer chassis or battery-powered projects.
Highlights
- Runs at 230 V for direct mains operation
- Delivers up to 35000 m³/h airflow for high-volume cooling
- Withstands ambient temperatures from -25 °C to 75 °C for harsh environments
- Full metal housing ensures durability and structural rigidity
- Speed controlled via 0-100 % analog or serial interface
Specifications
No published specifications for this item yet.
Questions about this item
What comes in the box with the R2E225-BA47-11 fan and is a capacitor included?
The fan is supplied as a complete unit with its integrated 5 µF 400 VDB capacitor already fitted; no separate capacitor purchase is required.
The specifications show two current values — 0.63 A and 0.9 A — which one applies to my 230 V supply?
At 50 Hz the fan draws 0.63 A; at 60 Hz it draws 0.9 A. Both figures are for the same 230 VAC nominal voltage.
The headline airflow is listed as 35000 m³/h — what does that mean once the fan is installed in a chassis?
That figure represents the maximum free-air delivery of the ebm-papst centrifugal range; actual airflow in a case will be lower due to static pressure from filters, grilles and component layout.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



