Fans
Fans R2E220-AA40-80 Centrifugal Case Fan 230V 85/100W 2700rpm
A 230 V AC centrifugal case fan running at 2700 rpm with 85 to 100 W power draw for inverter cooling
- Original German ebmpapst engineering ensures reliable industrial cooling
- 230 V AC single-phase motor runs directly from mains without extra power supply
- Backward-curved centrifugal impeller delivers up to 35000 m³/h airflow for high-volume intake
- CE and UL 2111 approvals confirm compliance with European and North American safety standards
- Wide -25 °C to 55 °C operating range suits harsh ambient environments
Industrial Centrifugal Fan for 230 V Systems
The Fans R2E220-AA40-80 is an ebm-papst centrifugal case fan built for 230 VAC single-phase operation. Its backward-curved impeller and external-rotor motor deliver airflow up to 35000 m³/h without a scroll housing. The unit is CE and UL 2111 approved and rated for ambient temperatures from -25 °C to 55 °C, making it suitable for inverter cooling and forced-air electronics enclosures.
Steady-State Airflow at 50 and 60 Hz
At 50 Hz the motor runs at 2600 rpm drawing 85 W and 0.38 A; at 60 Hz it reaches 2700 rpm with 100 W and 0.43 A. Because the external-rotor design couples the rotor directly to the impeller, speed and flow remain stable during continuous duty rather than dropping after a short burst. The 3 µF (50 Hz) or 2 µF (60 Hz) run capacitor at 400 VDB maintains consistent torque across the voltage cycle.
Thermal Range, Acoustic Profile and Power Draw
The fan operates continuously between -25 °C and 55 °C with no minimum back-pressure requirement. Power consumption stays at 85 W (50 Hz) or 100 W (60 Hz) under normal load, with starting current of 0.54 A at 50 Hz and 0.52 A at 60 Hz. The compact steel housing and integrated motor keep the acoustic signature low for industrial environments while providing forced electronic cooling.
Highlights
- Original German ebmpapst engineering ensures reliable industrial cooling
- 230 V AC single-phase motor runs directly from mains without extra power supply
- Backward-curved centrifugal impeller delivers up to 35000 m³/h airflow for high-volume intake
- CE and UL 2111 approvals confirm compliance with European and North American safety standards
- Wide -25 °C to 55 °C operating range suits harsh ambient environments
Specifications
No published specifications for this item yet.
Questions about this item
How much heat and power will the 230 V 85 W motor add when running continuously?
The motor draws 0.38 A at 50 Hz and 85 W, rising to 0.43 A and 100 W at 60 Hz, so waste heat scales with the load you apply.
What external capacitor must I supply for the 230 V single-phase motor?
A 3 µF 400 VDB capacitor is required at 50 Hz; a 2 µF 400 VDB unit covers 60 Hz operation.
Will the 2700 rpm backward-curved impeller fit inside a legacy 220 mm mounting frame?
The model designation R2E220 indicates a 220 mm frame size, matching standard legacy cut-outs.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114365BTC
In stock
