We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black metal centrifugal fan with curved blades and wire grille, 160mm diameter, IP44 rated

Fans

Fans R2D140-AC02-13Motor case fan 400V 2400rpm 270W

SKU CH-40G8-H6K84 MPN R2D140-AC02-13Motor

Centrifugal fan with 160 mm blades runs at 2400 rpm on 400 V, drawing 0.42 A for 270 W motor power

  • Centrifugal design moves air efficiently through restricted spaces with 160 mm blade diameter
  • IP44 protection resists dust and splashes for reliable industrial use
  • 400 V three-phase supply suits factory and rail power systems directly
  • 2400 rpm top speed delivers strong airflow for drive and inverter cooling
  • 270 W motor rating handles continuous heavy-duty thermal loads

Industrial radial fan for equipment cooling

The Fans R2D140-AC02-13Motor is a Germany ebmpapst centrifugal fan built for drive cooling in medical, rail vehicle, industrial cleaning, electronic product, new energy vehicle and supermarket applications. It runs on a 400 V three-phase supply at 2400 rpm with a 270 W motor and carries IP44 protection against splashing water and solid particles.

Suits integrators needing a 160 mm radial blower

Engineers specifying forced-air cooling for inverters, drives or similar 400 V equipment will match the 0.42 A current draw and 260/270 W power envelope. Builders working on low-voltage consumer PCs or silent desktop cases should look elsewhere because the unit requires industrial three-phase power and is not designed for ATX chassis mounting.

Fits 400 V three-phase systems

The fan connects directly to a 400 V inverter or drive supply and draws 0.42 A, freeing the builder from adding a separate low-voltage fan controller. Its radial airflow pattern suits ducted enclosures where axial fans cannot develop sufficient static pressure.

Highlights

  • Centrifugal design moves air efficiently through restricted spaces with 160 mm blade diameter
  • IP44 protection resists dust and splashes for reliable industrial use
  • 400 V three-phase supply suits factory and rail power systems directly
  • 2400 rpm top speed delivers strong airflow for drive and inverter cooling
  • 270 W motor rating handles continuous heavy-duty thermal loads

Specifications

No published specifications for this item yet.

Questions about this item

What power supply must I already have to run this 400 V 270 W centrifugal fan?

You need a three-phase 400 V supply capable of at least 0.42 A and 270 W to drive the ebmpapst R2D140-AC02-13Motor at full speed.

Will this IP44-rated radial fan fit alongside the D2E146-AP47-22 model I already use?

Both are 160 mm blade-diameter radial fans, but the R2D140-AC02-13Motor runs on 400 V three-phase while the D2E146-AP47-22 is a 230/400 V dual-voltage unit, so wiring and mounting must be checked separately.

How can I confirm the fan is operating at its rated 2400 min⁻¹ after installation?

Measure the rotational speed with a tachometer; a reading of 2400 r/min at 400 V and 0.42 A shows the motor is delivering its specified 270 W performance.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.