Fans
Fans P1225Y48BPLB5h-7 120*120*25mm DC48V 0.28A three-wire converter case fan
A 120 mm case fan running on 48 V DC at 0.28 A with a three-wire connector
- DC 48 V input suits industrial and server chassis
- 28 A draw keeps power consumption low
- 120 x 120 x 25 mm fits standard 120 mm mounts
- Three-wire connector enables speed monitoring
DC 48 V three-wire case fan
The PELKO MOTORS P1225Y48BPLB5h-7 is a 120 mm square case fan designed for systems that supply 48 V DC power. It draws 0.28 A and uses a standard three-wire connector for speed monitoring. The 25 mm frame depth fits common mounting points in server and industrial chassis. ||
Three-wire speed signal only
The three-wire interface reports rotational speed but does not accept PWM control signals. Voltage regulation is required to change fan speed. Builders needing four-wire PWM regulation or a different supply voltage should select an alternative model.
Highlights
- DC 48 V input suits industrial and server chassis
- 28 A draw keeps power consumption low
- 120 x 120 x 25 mm fits standard 120 mm mounts
- Three-wire connector enables speed monitoring
Specifications
No published specifications for this item yet.
Questions about this item
Which size should I pick for a standard 120 mm case opening?
The frame measures 120 by 120 by 25 mm, matching the common 120 mm mounting pattern used in most chassis.
What does the 48 V 0.28 A rating mean when the fan is installed?
It will draw roughly 0.28 amps from a 48 V DC supply, so the header or controller must deliver that current at the rated voltage.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114452BTC
In stock
