We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square black 119mm AC axial fan with ball bearing and wire connector

Fans

Fans MX2B3 19028422A 119.13mm 115V AC case fan

SKU CH-H1S8-F5MFE

115 V AC axial fan measuring 119.13 mm square by 39.12 mm deep, delivering 170 m³/h airflow at 3100 rpm with 47.6 dB noise and ball-bearing construction

  • 115 V AC supply powers industrial equipment directly
  • 170 m³/h airflow moves heat through tight enclosures
  • 3 100 rpm ball-bearing motor sustains continuous duty cycles
  • 6 dB noise level suits noise-sensitive environments
  • 12 mm slim depth fits shallow chassis slots

Purpose-built industrial axial fan

The MX2B3 19028422A is a new AC axial fan built for industrial and embedded cooling. It fits medical equipment, rail systems, drive enclosures and other machinery that requires a 115 V supply. The ball-bearing motor targets continuous-duty environments where long service life matters.

115 V AC supply voltage

This unit only operates from a 115 V AC source, drawing 260 mA at 20 W. It cannot be powered from DC rails or other mains voltages, so the installer must confirm the available supply matches exactly.

170 m³/h airflow at 3100 rpm

At full speed the fan moves 170 m³/h while producing 47.6 dB of noise. The 39.12 mm depth and 119.13 mm square frame suit standard cut-outs, but the fixed AC input and single-speed design limit use in variable-speed or low-noise builds.

Highlights

  • 115 V AC supply powers industrial equipment directly
  • 170 m³/h airflow moves heat through tight enclosures
  • 3 100 rpm ball-bearing motor sustains continuous duty cycles
  • 6 dB noise level suits noise-sensitive environments
  • 12 mm slim depth fits shallow chassis slots

Specifications

No published specifications for this item yet.

Questions about this item

What does the 170 m³/h airflow figure mean once the fan is installed in a real case?

It moves up to 170 cubic metres of air per hour at free delivery, so actual case airflow will be lower once filters, grilles and components add resistance.

How does the AC supply and 3100 rpm speed cap performance in practice?

The fan runs directly from 115 V AC at a fixed 3100 rpm, so speed cannot be PWM-controlled and airflow stays constant regardless of temperature.

What does the 119.13 mm square frame and 39.12 mm depth need to fit or mount?

It requires a 119.13 mm square cut-out with four corner screw holes and 39.12 mm clearance behind the mounting surface.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.