We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Large square axial fan in black metal frame with visible blades and wire leads

Fans

Fans MRS20-TULSize 200V 0.5A 15-20 CFM case fan

SKU CH-FAEY-MCMX3 MPN MRS20-TULSize

200V axial fan delivers 15-20 CFM airflow at 60-61 dBA for industrial cooling applications

  • Air Flow15-20 CFM
  • Moves 15-20 CFM for steady component cooling
  • Runs on 200-230 V single-phase mains power
  • Draws only 75-95 W at 0.4-0.5 A
  • Spins at 3350-3400 RPM with 221-265 Pa static pressure
  • Operates at 60-61 dBA for quiet operation

Industrial axial cooling fan

The ORIX MRS20-TUL is a 200 mm square axial fan built for equipment that needs steady airflow in a shallow mounting depth. It runs on single-phase 200-230 V mains power and draws 0.4-0.5 A depending on line voltage. The unit suits industrial, medical, rail and commercial installations where space-saving air exchange is required.

15-20 CFM airflow with 221-265 Pa static pressure

At 3350-3400 RPM the fan delivers 13.2-15.5 m³/min of air volume, equivalent to 15-20 CFM. Maximum static pressure reaches 221-265 Pa, letting it push air through restrictive heat exchangers or dense filter meshes. Acoustic output sits at 60-61 dBA, which is audible in quiet offices but typical for industrial environments. Power draw is 75-95 W.

90 mm mounting depth for tight enclosures

The 90 mm frame depth allows the fan to fit inside compact cabinets, drive enclosures or rack shelves where deeper blowers cannot. Standard 200 mm square bolt pattern aligns with common cut-outs in sheet-metal panels. Mains-voltage operation removes the need for an external DC supply or transformer. The design is not suited for low-noise desktop PCs or battery-powered devices.

Highlights

  • Moves 15-20 CFM for steady component cooling
  • Runs on 200-230 V single-phase mains power
  • Draws only 75-95 W at 0.4-0.5 A
  • Spins at 3350-3400 RPM with 221-265 Pa static pressure
  • Operates at 60-61 dBA for quiet operation

Specifications

Air Flow15-20 CFM

Questions about this item

Will this 200 V fan run on the same circuit as my existing 230 V equipment?

The motor is rated for single-phase 200 / 230 V input, so it can share a 230 V supply with your current gear.

How do I confirm the fan is spinning at the correct speed after installation?

Listen for 60–61 dBA noise and expect 3350–3400 RPM at 200 V / 230 V respectively.

Does the box include mounting screws or a power cable?

Only the axial fan unit is supplied; fixings and a 200 V mains lead must be sourced separately.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.