We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
ebmpapst M4Q045-CA01-01 230V axial fan, metal frame, black blades, compact industrial design

Fans

Fans M4Q045-CA01-01Current 230V case fan

SKU CH-ZC1Q-2CM3T MPN M4Q045-CA01-01Current

230 V centrifugal fan delivers up to 3500 m³/h airflow at 1300 or 1550 RPM with oil bearing and 1.1 kg steel housing

  • High airflow up to 3500 m³/h for demanding cooling
  • 230 V AC operation suits industrial and commercial power
  • Oil bearing provides reliable continuous rotation
  • Dual-speed 1300/1550 RPM adapts to load
  • Compact external-rotor motor fits tight enclosures

Industrial 230 V AC case fan

The ebmpapst M4Q045-CA01-01Current is a mains-powered axial fan rated at 230 V and 0.2 A. It delivers up to 3500 m³/h airflow at 1300 or 1550 RPM depending on 50 Hz or 60 Hz supply. The oil-bearing motor weighs 1.1 kg and draws 31 W or 7 W.

Verify mains wiring and mounting before purchase

Confirm your chassis or enclosure can accept a 230 V AC device and that local electrical codes permit direct line-voltage installation. Check that the 45 mm frame matches your cut-out and that the oil bearing orientation suits the intended mounting angle. No low-voltage PWM header is present.

Fits server, industrial and refrigeration cabinets

The fan plugs straight into 230 V mains, freeing a motherboard header and removing the need for a separate DC power supply. Its steel plate construction suits rack, medical, rail and supermarket freezer applications where 100 % analog or serial speed control is required. Ensure the enclosure provides suitable grounding and finger guards.

Highlights

  • High airflow up to 3500 m³/h for demanding cooling
  • 230 V AC operation suits industrial and commercial power
  • Oil bearing provides reliable continuous rotation
  • Dual-speed 1300/1550 RPM adapts to load
  • Compact external-rotor motor fits tight enclosures

Specifications

No published specifications for this item yet.

Questions about this item

What comes with the M4Q045-CA01-01Current fan and what must be sourced separately?

The unit is supplied as a standalone 230 V AC fan with an oil bearing. A power cord, mounting screws and any speed-control interface (analogue or serial) are not included and must be purchased separately.

How do I choose between the two speed and power ratings shown for this model?

At 50 Hz the fan draws 31 W and runs at 1300 RPM; at 60 Hz it draws 7 W and runs at 1550 RPM. Select the rating that matches your local mains frequency.

What does the 3500 m³/h airflow figure mean once the fan is installed in a case?

That is the free-air maximum. In a real chassis the actual flow will be lower because of filter, grille and component resistance, but the fan can still deliver forced electronic cooling for medical, rail, industrial or supermarket equipment.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.