We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square black frame fan with centre hub and curved blades

Fans

Fans KD1212PMBX 120 mm 12 V 7.6 W case fan

SKU CH-XB7R-3PAM0 MPN KD1212PMBX

A 120 mm ball-bearing case fan delivering 15-20 CFM at 3150 RPM with 46.5 dB noise

  • Air Flow15-20 CFM
  • 120 mm axial design fits tight spaces
  • 3150 RPM delivers 15-20 CFM airflow
  • Ball bearing ensures long service life
  • 12 VDC at 7.6 W keeps power draw low
  • 5 dB(A) noise level suits quiet builds

SUNON 120 mm 12 V axial fan

The SUNON KD1212PMBX-6A is a 120 × 120 × 38 mm axial fan rated at 12 VDC with a voltage range of 10.2 ~ 13.8 VDC. It draws 0.63 A for 7.6 W of power and spins at 3150 RPM using a ball bearing.

Suited for industrial cooling

This fan serves medical devices, rail vehicles, drive cooling, industrial cleaning systems and electronic products where steady airflow matters. It is not suited for builds needing PWM speed control or noise levels below the rated 46.5 dB(A).

120 CFM airflow at 3150 RPM

The fan delivers 120 CFM of wind capacity with a static pressure of 84.7 Pa. That single airflow figure decides whether the unit meets the thermal demands of your chassis or heat exchanger.

Highlights

  • 120 mm axial design fits tight spaces
  • 3150 RPM delivers 15-20 CFM airflow
  • Ball bearing ensures long service life
  • 12 VDC at 7.6 W keeps power draw low
  • 5 dB(A) noise level suits quiet builds

Specifications

Air Flow15-20 CFM

Questions about this item

How do I mount the 120 mm fan and what is the common mistake with the 38 mm depth?

Use the four corner screw holes on the 120 x 120 mm frame; the frequent error is choosing screws that are too long for the 38 mm thickness and hitting internal components.

What part will need replacement first on this ball-bearing fan?

The ball bearing itself is the wear item; expect it to require replacement after extended continuous operation at 3150 RPM.

At 46.5 dB(A) and 7.6 W, what limit appears first during sustained use?

The acoustic limit of 46.5 dB(A) is usually noticed before the 7.6 W thermal limit becomes an issue in typical chassis airflow.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.