We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
SUNON KD1208PTS1 80mm square axial fan 12V 2.6W

Fans

Fans KD1208PTS1 80mm 12V 2.6W case fan

SKU CH-6AV4-DM4R7

12 V, 2.6 W axial fan measuring 80 × 80 × 25 mm for compact case cooling

  • Moves air efficiently in tight spaces with 80 x 80 x 25 mm frame
  • Low 2.6 W draw keeps system power budget low
  • Quiet axial design suits noise-sensitive medical and industrial gear
  • Runs on standard 12 V 0.21 A supply for easy integration
  • Space-saving depth fits heat-exchanger and drive-cooling applications

Purpose-built 80 mm axial fan

This SUNON KD1208PTS1 is a compact 12 V axial fan measuring 80 by 80 by 25 mm. It draws 0.21 A for 2.6 W of power and is designed for hot or cold air exchange in tight spaces. The low-profile frame fits medical, rail, industrial and electronic enclosures where installation depth is limited.

Ideal for space-constrained cooling

Engineers specifying airflow through heat exchangers in 1U servers, networking gear or embedded chassis will value the slim depth and quiet operation. Builders needing higher static pressure for dense radiators or larger case diameters should consider alternative form factors.

Deciding specification: 25 mm thickness

The 25 mm frame depth determines whether this fan clears your component stack or chassis wall. Verify the available clearance before ordering, as no thinner or thicker variant is described in the data.

Highlights

  • Moves air efficiently in tight spaces with 80 x 80 x 25 mm frame
  • Low 2.6 W draw keeps system power budget low
  • Quiet axial design suits noise-sensitive medical and industrial gear
  • Runs on standard 12 V 0.21 A supply for easy integration
  • Space-saving depth fits heat-exchanger and drive-cooling applications

Specifications

No published specifications for this item yet.

Questions about this item

What power connector does the KD1208PTS1 need to run?

The fan runs on 12 V and draws 0.21 A, so it needs a standard 12 V fan header or Molex supply that can deliver at least 2.6 W.

Will the 80 mm by 25 mm frame fit in the same cut-out as my older 80 mm fan?

Yes, the housing measures 80 mm square and 25 mm deep, matching the common 80 mm mounting pattern used for years.

How can I confirm the KD1208PTS1 is spinning at the right speed after install?

Check the motherboard or fan-controller RPM read-out; a steady reading with 12 V applied and 0.21 A current draw shows the motor is operating normally.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.