We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small square 50mm axial fan with black frame and transparent blades

Fans

Fans GM1205PHVX-ABearing 5015 12V 1.9W case fan

SKU CH-62S7-FDPVR MPN GM1205PHVX-ABearing

A 50 × 50 × 15 mm axial fan with magnetic-suspension motor runs on 12 V at 0.15 A and 1.9 W for compact server cooling

  • Compact 50 mm frame fits tight server chassis
  • Magnetic suspension motor runs at low noise levels
  • 12 V 1.9 W draw keeps power budget low
  • 15 A current enables simple 12 V rail wiring
  • Axial design delivers efficient airflow for heat exchangers

SUNON 5015 Server Cooling Fan

This 50 mm axial fan is built for tight server and industrial enclosures where airflow must pass through heat exchangers. It runs on 12 V and draws 0.15 A for a rated 1.9 W. The magnetic suspension motor keeps noise low and service life long in continuous-duty environments.

1.9 W Power and 50 mm Depth

At 1.9 W the fan delivers forced electronic cooling for dense chassis and heat-exchanger arrays where installation depth is restricted. It suits applications that need steady airflow through restrictive paths but is not intended for high-static-pressure radiators or large-case exhaust roles.

Magnetic Suspension Motor

The magnetic suspension bearing removes mechanical contact, reducing wear and acoustic signature over sleeve or ball alternatives. No separate speed-control accessory is bundled; 100 % speed control is available through an analog or serial interface when the host system provides it.

Highlights

  • Compact 50 mm frame fits tight server chassis
  • Magnetic suspension motor runs at low noise levels
  • 12 V 1.9 W draw keeps power budget low
  • 15 A current enables simple 12 V rail wiring
  • Axial design delivers efficient airflow for heat exchangers

Specifications

No published specifications for this item yet.

Questions about this item

Will the 50 mm by 50 mm frame fit the mounting holes on my older 5015 server chassis?

The fan measures 50 mm by 50 mm by 15 mm, matching the standard 5015 footprint used in many legacy servers.

How can I verify the magnetic suspension motor is running correctly after installation?

At 12 V the unit draws 0.15 A and runs at 1.9 W; a steady current near that value confirms normal operation.

Does the package include a power cable or do I need to source a 12 V connector separately?

The listing describes the fan unit only; a compatible 12 V power lead must be purchased if your chassis does not already provide one.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.