Fans
Fans G10D12BS17AZ-57 12V 0.29A 9733 PWM case fan
12 V 0.29 A PWM fan spins at 9733 rpm for turbo cooling
- NIDEC original motor ensures reliable long-term operation
- 12 V 0.29 A draws minimal power from the PSU
- 4-wire PWM enables precise automatic speed control
- 9733 RPM delivers strong airflow for turbo cooling
NIDEC PWM Turbo Cooling Fan
This NIDEC original case fan operates on a 12 V supply and draws 0.29 A through its four-wire PWM interface. The G10D12BS17AZ-57 model spins at 9733 rpm to deliver turbo cooling performance for desktop systems.
Ideal for PWM-controlled chassis airflow
Builders needing a 12 V PWM fan for targeted component cooling will find this unit suitable. Users requiring larger diameter fans, lower rotational speeds, or different voltage specifications should consider alternative cooling solutions.
Highlights
- NIDEC original motor ensures reliable long-term operation
- 12 V 0.29 A draws minimal power from the PSU
- 4-wire PWM enables precise automatic speed control
- 9733 RPM delivers strong airflow for turbo cooling
Specifications
No published specifications for this item yet.
Questions about this item
How can I confirm the fan is spinning at the rated 9733 RPM after installation?
Connect the 4-wire PWM connector to a motherboard header, then monitor the reported speed in BIOS or a hardware utility; it should read close to 9733 RPM under full PWM duty.
What is included in the box and do I need any extra cables or mounting screws?
The package contains the NIDEC G10D12BS17AZ-57 fan unit only; standard case mounting screws and a 4-pin PWM fan header on the motherboard are required but not supplied.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



