Fans
Fans FD8025B12W11-3R21 80x80x25mm 12V 5.40W case fan
80 mm axial case fan running on 12 V and drawing 5.40 W
- 80 mm square frame fits standard case mounts
- 12 V DC power draws 5.40 W from the system
- 3-wire connection supports speed monitoring
- 25 mm thickness suits slim chassis slots
80 mm axial fan for 12 V systems
This 80 by 80 by 25 mm axial flow fan runs on 12 V DC and draws 5.40 W. It is built for chassis or equipment cooling where a compact square frame is required. The three-wire lead provides power, ground and a speed signal for monitoring.
Check 12 V header and mounting holes
Verify that your board or controller offers a 12 V fan header with three pins for the tachometer signal. Confirm the chassis has 80 mm mounting points with the standard screw spacing. Ensure the 25 mm thickness fits the available clearance in your enclosure.
Highlights
- 80 mm square frame fits standard case mounts
- 12 V DC power draws 5.40 W from the system
- 3-wire connection supports speed monitoring
- 25 mm thickness suits slim chassis slots
Specifications
No published specifications for this item yet.
Questions about this item
Does the FD8025B12W11-3R21 fan include mounting screws or a power adapter in the box?
The fan is supplied as a single 80x80x25mm axial unit with a three-wire lead; mounting hardware and any adapter cables are not included.
Should I choose the 12V 5.40W version or a lower-voltage model for a standard chassis fan header?
A 12V 5.40W rating matches typical motherboard chassis headers; select this model when your header supplies 12V and you need 80mm airflow.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114537BTC
In stock
