We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square black 90x90x38mm 24V case fan with nine blades and red black wires

Fans

Fans Delta PFB0924GHE 24V 90x90x38mm case fan

SKU CH-SJ05-MMMG5

A 90 × 90 × 38 mm case fan rated at 24 V and 0.76 A with double-ball bearings and nine blades

  • 24 V rated voltage suits industrial inverter cooling
  • 76 A input power defines electrical load for ACS510/550 drives
  • 90 × 90 × 38 mm frame fits standard 92 mm mounting
  • Double ball bearing extends service life in continuous operation
  • 9 blade impeller moves air through tight chassis spaces

Delta PFB0924GHE 24V 90mm Fan

The Delta PFB0924GHE is a 90 by 90 by 38 millimetre axial fan rated for 24 volts and 0.76 amps. It uses a double ball bearing and a nine-blade rotor to deliver reliable airflow for industrial inverter cooling. The unit ships new and is built to the original manufacturer specification.

Suits ABB ACS510 and ACS550 drive maintenance

This fan is a direct replacement for the cooling module used in ABB ACS510 and ACS550 inverters. It fits the 9238 frame size and connects with a red and black two-wire lead. Buyers who need a different voltage, a PWM control wire, or a smaller frame should look at other models.

24V 0.76A double ball bearing specification

The critical specification is the 24 volt 0.76 amp rating combined with a double ball bearing. This electrical and mechanical profile determines whether the fan matches the inverter's original cooling requirement. Verify the voltage and current against the drive nameplate before ordering.

Highlights

  • 24 V rated voltage suits industrial inverter cooling
  • 76 A input power defines electrical load for ACS510/550 drives
  • 90 × 90 × 38 mm frame fits standard 92 mm mounting
  • Double ball bearing extends service life in continuous operation
  • 9 blade impeller moves air through tight chassis spaces

Specifications

No published specifications for this item yet.

Questions about this item

What does the 24 V rating cap in practice?

The fan draws 0.76 A at 24 V, so the supply must deliver at least that current for full speed.

What mounting holes does the 90 × 90 × 38 mm frame use?

It follows the standard 90 mm square pattern with four corner holes spaced for M3 screws.

Which wire is positive on the red–black lead?

Red is positive and black is negative; reversing them will prevent the fan from spinning.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.