We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Large black metal centrifugal fan with steel housing and visible rotor blades

Fans

Fans D4E160-EG06-07Current 160mm case fan

SKU CH-8E4R-PKDK8 MPN D4E160-EG06-07Current

230 V AC centrifugal fan delivering up to 3500 m³/h airflow at 1300 or 1550 rpm with ball-bearing motor and 100 % speed control

  • Moves up to 3500 m³/h for powerful forced cooling
  • Ball-bearing motor runs at 1300/1550 RPM for steady airflow
  • Speed fully controllable via analog or serial interface
  • 160 mm compact external-rotor design fits tight spaces
  • Built on a sturdy steel frame weighing 5.8 kg

Industrial 160 mm AC Centrifugal Fan

This 160 mm centrifugal fan from ebmpapst runs on 230 V AC and delivers up to 3500 m³/h of airflow. It uses a ball-bearing external-rotor motor rated at 180 W (50 Hz) or 245 W (60 Hz) with a current draw of 0.79 A to 1.07 A. The unit weighs 5.8 kg and is built on a sturdy steel plate for industrial environments.

Capacity and Headroom

At 1300 rpm on 50 Hz and 1550 rpm on 60 Hz the fan provides high-volume forced cooling for medical, rail, drive, hotel, industrial cleaning, electronics, new-energy vehicle and supermarket applications. The 100 % analog or serial speed control lets you match airflow precisely to load, but the fixed 230 V AC supply and 5.8 kg mass limit use to stationary equipment with appropriate mounting.

Upgrade Path

The fan replaces older fixed-speed AC blowers where variable airflow and plug-and-play integration reduce commissioning time. The jump is worth it when an application demands full speed control, a compact external-rotor design and the reliability of a ball-bearing motor in a single 160 mm package.

Highlights

  • Moves up to 3500 m³/h for powerful forced cooling
  • Ball-bearing motor runs at 1300/1550 RPM for steady airflow
  • Speed fully controllable via analog or serial interface
  • 160 mm compact external-rotor design fits tight spaces
  • Built on a sturdy steel frame weighing 5.8 kg

Specifications

No published specifications for this item yet.

Questions about this item

Will the 230 V 50/60 Hz fan run from my existing 230 V AC supply without an extra transformer?

Yes, it is rated for 230 V at both 50 Hz and 60 Hz, so it connects directly to a standard 230 V mains supply.

How can I confirm the fan is spinning at the rated 1300/1550 RPM after installation?

Use a tachometer or the motherboard fan header read-out; the fan should report approximately 1300 RPM at 50 Hz and 1550 RPM at 60 Hz.

Does the box include mounting screws or a power cord, or must I buy them separately?

The fan is supplied as the motor-impeller unit only; mounting hardware and a mains lead are not included and must be sourced separately.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.