We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square black 90mm case fan with centre sticker and four mounting holes

Fans

Fans D09R-12TU 01 9025 12V 0.20A 90x90x25mm case fan

SKU CH-TE34-610QE

A 90 mm square case fan that draws 0.20 A at 12 V and fits a 25 mm mounting depth

  • Nidec original motor ensures reliable 90×90×25 mm cooling
  • 12 V 0.20 A draw keeps power use low
  • Standard 9025 footprint fits common chassis mounts
  • New condition guarantees full factory performance

90 mm 12 V case fan

This 90 mm square fan runs on 12 V and draws 0.20 A. It fits standard 9025 mounting holes in chassis and server enclosures. Builders replacing a failed 90 mm unit or adding spot cooling to a tight layout will find it a direct match.

Tool-free four-screw install

Align the 90 mm frame with the case holes, insert four screws and connect the two-pin power lead. The thin 25 mm profile leaves minimal clearance for cables or drive cages directly behind the fan. Systems needing PWM speed control or a three-pin header cannot use this two-wire model.

Highlights

  • Nidec original motor ensures reliable 90×90×25 mm cooling
  • 12 V 0.20 A draw keeps power use low
  • Standard 9025 footprint fits common chassis mounts
  • New condition guarantees full factory performance

Specifications

No published specifications for this item yet.

Questions about this item

How can I verify the D09R-12TU 01 is spinning correctly after installing it in my 90 mm mounting points?

Connect the fan to a 12 V header, power on the system, and confirm the blades rotate smoothly at the rated 0.20 A draw; a steady airflow through the 90×90×25 mm frame indicates normal operation.

What comes with the Nidec Original 9CM D09R-12TU 01 and do I need separate mounting screws?

The package includes the 9025 case fan only; standard 90 mm case screws or rubber mounts are not supplied and must be sourced separately for installation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.