We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Fans

Fans D06T-12TS15 01A 6025 12V 0.18A 3800RPM case fan

SKU CH-8D3D-J4BTX

A 60 mm square, 25 mm thick axial fan spins at 3800 RPM from a 12 V supply drawing 0.18 A

  • 60 mm square footprint fits tight builds
  • 12 V operation with 10.2–13.8 V range
  • 3800 RPM ±5 % airflow for targeted cooling
  • Double ball bearing extends service life
  • 16 W draw keeps power budget low

Nidec 60 mm 12 V case fan

This 60 mm by 25 mm axial fan runs on 12 V power and draws 0.18 A for 2.16 W input. It spins at 3800 RPM with a ±5 % tolerance and uses a double ball bearing for durability. The compact frame fits standard 6025 mounting points in tight chassis.

Who this suits

Builders replacing a 60 mm spot-cooling fan in industrial, medical or embedded hardware will match the original voltage and current draw. The wide working range of 10.2 V to 13.8 V tolerates supply variance.

Who should look elsewhere

Systems that require a larger frame, higher airflow or PWM speed control cannot use this fixed-speed three-wire design. Buyers needing a different voltage or connector type must choose another model.

Deciding specification

The 60 mm by 25 mm frame size combined with 12 V 0.18 A fixed-speed operation determines fit and electrical compatibility. Verify the mounting holes and power header before ordering.

Highlights

  • 60 mm square footprint fits tight builds
  • 12 V operation with 10.2–13.8 V range
  • 3800 RPM ±5 % airflow for targeted cooling
  • Double ball bearing extends service life
  • 16 W draw keeps power budget low

Specifications

No published specifications for this item yet.

Questions about this item

What does the 12 V power connection cap in practice?

It draws 0.18 A at 12 V for a 2.16 W power draw, spinning at 3800 RPM ± 5 %.

What clearance does the 60 × 60 × 25 mm frame need to fit?

The 60 mm square footprint and 25 mm depth require a standard 6025 mounting hole pattern with room for the frame thickness.

How is the fan mounted and which step is often missed?

Use four screws through the corner holes; the step often missed is orienting the airflow arrow toward the intended exhaust or intake direction.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.