Fans
Fans AFB0912VH 90mm 12V .60A 4-pin PWM case fan
A 90 mm case fan with 4-pin PWM control and 12 V, 0.60 A power draw
- PWM control adjusts speed to cooling demand
- 90 mm square frame fits standard mounting holes
- 25 mm thickness matches common case slots
- 12 V 0.60 A draw suits typical fan headers
90 mm PWM case fan
The AFB0912VH is a 90 mm square frame fan with a 25 mm thickness. It runs on 12 V DC and draws 0.60 A through a 4-pin PWM connector for automatic speed control. The unit is suited for compact chassis or CPU coolers that accept 92 mm mounting holes.
Capacity and headroom
The fan delivers forced airflow for moderate heat loads in small-form-factor builds. It reaches its limit when cooling high-TDP processors or multi-GPU setups that demand greater static pressure or volume. Builders needing higher airflow or larger frame sizes will need a different solution.
Highlights
- PWM control adjusts speed to cooling demand
- 90 mm square frame fits standard mounting holes
- 25 mm thickness matches common case slots
- 12 V 0.60 A draw suits typical fan headers
Specifications
No published specifications for this item yet.
Questions about this item
Will this 90 mm 4-pin PWM fan plug into the same 4-pin header I used for my old 12 V fan?
Yes, it uses a standard 4-pin PWM connector and runs on 12 V DC, so it fits the same motherboard header as your existing 12 V fan.
How can I confirm the AFB0912VH is spinning under PWM control after installation?
In BIOS or fan software, set a manual duty cycle and watch the reported RPM rise and fall with the curve; the 0.60 A rating means the header can supply enough current for full speed.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
