We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black square 80mm case fan with transparent blades and three-pin connector

Fans

Fans AFB0824VHSize 80mm 24V 3600 RPM case fan

SKU CH-0MCE-Z1JFR MPN AFB0824VHSize

An 80 mm 24 V axial fan with dual ball bearings delivers 42 CFM at 3600 RPM and 38 dB(A)

  • High airflow with 42.0 CFM for effective cooling
  • Low noise at 38 dB (A) for quiet operation
  • Dual ball bearing design for long-lasting reliability
  • 3-pin interface enables simple motherboard connection
  • 36 W power draw keeps energy use low

80 mm 24 V case fan for industrial cooling

This 80 mm axial fan runs on 24 V DC and draws 0.21 A through a 3-pin connector. It spins at 3600 RPM and delivers 42.0 CFM of airflow at a rated noise level of 38 dB (A). The dual-ball bearing design suits continuous duty in medical, rail and industrial equipment.

Limits of a 3-pin 24 V interface

The three-pin connector supplies power and a tachometer signal but does not support PWM speed control. Voltage must stay at 24 V; running the fan from a 12 V header will not start the motor. Motherboard headers that only provide 12 V or expect a four-pin PWM fan are electrically incompatible.

Check voltage header and mounting before ordering

Verify that your system provides a 24 V DC fan header or a suitable external supply with a matching three-pin plug. Confirm the 80 × 80 × 25 mm frame fits the intended mounting holes and that the 3.36 W power draw is within the header’s current rating. The fan is not designed for standard 12 V PC chassis headers.

Highlights

  • High airflow with 42.0 CFM for effective cooling
  • Low noise at 38 dB (A) for quiet operation
  • Dual ball bearing design for long-lasting reliability
  • 3-pin interface enables simple motherboard connection
  • 36 W power draw keeps energy use low

Specifications

No published specifications for this item yet.

Questions about this item

Should I pick the 24 V model or look for a 12 V version?

This fan is built for 24 V operation and draws 0.21 A, so it must be connected to a 24 V header or supply; a 12 V line will not run it correctly.

What does 3600 RPM actually deliver inside a case?

At 3600 RPM the fan moves 42.0 CFM (1.19 m³/min) at 38 dB(A), giving strong directional airflow for component or heatsink cooling.

The 3-pin connector — does it support PWM control?

The 3-pin interface provides power and a tachometer signal only; speed is set by voltage, not by a PWM duty cycle.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.