We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square 80 mm black frame fan with centre hub and seven blades

Fans

Fans AFB0812VHBSize 80×80×15mm 12V 0.30A 3700RPM 39.2CFM double ball case fan

SKU CH-RJXX-NS3F6 MPN AFB0812VHBSize

An 80×80×15 mm axial case fan moves 39.2 CFM at 3700 RPM using a double ball bearing and 12 V 0.30 A power

  • High airflow of 39.2 CFM from compact 80×80×15 mm frame
  • Double ball bearing rated for long continuous operation
  • Low 0.19 A actual draw at 12 V DC
  • 3700 RPM speed delivers strong static pressure
  • Axial design suits tight heat-exchanger spaces

80 mm Delta double-ball case fan

This 80 × 80 × 15 mm axial fan runs on 12 V DC and draws 0.30 A at full speed. The double ball bearing supports 3700 RPM and delivers 39.2 CFM of airflow. It is suited for compact chassis or targeted component cooling where a slim 15 mm profile is required.

Two-wire 12 V connection and 15 mm depth

The fan uses a standard two-wire 12 V feed, so installation is a matter of plugging it into a motherboard header or fan controller. Its 15 mm thickness fits most 80 mm mounts, but the 3700 RPM rating means audible noise at full voltage. Speed control via PWM is not available on the two-wire design.

39.2 CFM for tight spaces

At 39.2 CFM the fan moves enough air for CPU coolers, GPU brackets or drive cages in small-form-factor builds. Headroom drops when static pressure rises, such as dense heatsink fins or restricted grilles. It is not intended for high-impedance radiators or multi-fan push-pull arrays.

Highlights

  • High airflow of 39.2 CFM from compact 80×80×15 mm frame
  • Double ball bearing rated for long continuous operation
  • Low 0.19 A actual draw at 12 V DC
  • 3700 RPM speed delivers strong static pressure
  • Axial design suits tight heat-exchanger spaces

Specifications

No published specifications for this item yet.

Questions about this item

How do I confirm the AFB0812VHB is spinning at the rated 3700 RPM after installation?

Check the fan header reading in BIOS or monitoring software; it should report 3700 RPM and a current draw near 0.19 A under load.

What comes with the AFB0812VHB and what must I supply?

The box contains the 80 × 80 × 15 mm fan with double ball bearing and attached power lead; you must provide a 12 V DC source and a compatible 3-pin or 4-pin motherboard header.

Which AFB0812VHB version should I choose for a standard 80 mm case mount?

Select the AFB0812VHBSize model rated at 12 V, 0.30 A, 3700 RPM and 39.2 CFM; it matches the 8015 form factor for direct 80 mm mounting.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.